Perma PRO LC500 Lubricant cartridge with Shell Gadus S3 V220 C2

Perma PRO LC500 Lubricant cartridge with Shell Gadus S3 V220 C2 | N° 106862

Shell Gadus S3 V220C 2 Multipurpose Lithium complex extreme pressure grease

• Excellent mechanical stability even under vibrating conditions
• Enhanced extreme-pressure properties
• Good water resistance
• High dropping point
• Long operational life at high temperatures
• Effective corrosion protection

Technical specifications

• NLGI Consistency: 2
• Colour: Red
• Soap Type: Lithium complex
• Base Oil Type: Mineral
• Base Oil Viscosity @40°C cSt IP 71 / ASTM D445: 220
• Base Oil Viscosity @100°C cSt IP 71 / ASTM D445: 19
• Cone Penetration, Worked @25°C 0.1mm IP 50 / ASTM D217: 265-295
• Dropping Point °C IP 396: 240

Applications

• Shell Gadus S3 V220C greases are used for the grease lubrication of heavy-duty bearings used in machinery found in the following applications:
  • Continuous casting
  • Vibrating sieves
  • Quarries
  • Breakers
  • Roller conveyors
  • Automotive Wheelbearings

---

Hazard Information (CLP)

Signal word: Warning.

Hazard Statements (H-phrases)

• H319: Causes serious eye irritation.
• H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements (P-phrases)

Prevention:

• P273: Avoid release to the environment.
• P280: Wear protective gloves/ eye protection/ face protection.

Response:

• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 + P313: If eye irritation persists: Get medical advice/ attention.

Storage:

• No specific precautionary statements required.

Disposal:

• P501: Dispose of contents/ container to an approved waste disposal plant.

Additional Labelling (EUH-phrases)

• Contains Fatty acids, C18 unsaturated, reaction products with diethylenetriamine. May produce an allergic reaction.

---

Perma PRO ​Multi-Point Lubrication Systems:

PRO MP-6

• PRO MP-6 is a battery operated multi-point lubrication system.
• The MP-6 distributor discharges directly without pressure loss and enables tube extensions up to 5 m. 
• PRO MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots.
• Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
• Power supply: Battery PRO B

PRO C MP-6

• PRO C MP-6 can also be operated in IMPULSE mode.
• The impulse for a lubricant discharge can be PLC controlled.
• Power is supplied via the machine and can be PLC monitored and controlled.
• PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots.
• Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
• Power supply: External: 15-30 V

PRO LINE

• PRO LINE is a special multi-point lubrication system for linear guides. 
• Main applications for the multi-point lubrication system perma PRO LINE are linear guides.
• Application fields range from various linear guide and drive units in all kinds of industries – from automotive to paper. Other applications are roller and sliding bearings, open gears and spindles.
• Power supply: Battery PRO B

PRO C LINE

• PRO C LINE is a special multi-point lubrication system with 1 – 6 outlet connections for linear guides
• PRO C LINE receives its power from the machine and can be monitored and controlled via PLC.
• Main applications for the multi-point lubrication system perma PRO C LINE are linear guides.
• Application fields range from various linear guide systems and drives in the automotive industry to the paper industry. Other applications are roller and sliding bearings, open gears and spindles.
• Power supply: External: 15-30 V

Information on product safety (Manufacturer, Contact)

perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0, [email protected]