Description
Universal high-performance lubricant.
- MICROLUBE GB 0 is a special mineral oil based lubricant. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, and shows a good wetting behaviour and water resistance.
- Size: 25kg bucket
- Available in 400g cartridge , 1kg can, 25kg bucket, 180kg drum
Benefits for your application:
- Universal high-performance lubricant
- High pressure absorption capacity
- Good wear protection
- Good anticorrosion behaviour
- Pumpable through centralized systems
Application:
MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.
Application notes:
MICROLUBE GB 0 is applied by brush, spatula, grease gun or centralized lubrication system. Immersion lubrication of gears is possible up to a peripheral speed of approx. 3 m/s or via forcedfeed lubrication.
Product data:
| Article number | 020232 |
| Texture | homogeneous |
| Color space | red |
| Appearance | transparent |
| Density at 20 °C | approx. 0.90 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 355 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 385 x 0.1 mm |
| Base oil viscosity at 40 °C, calculated value | approx. 590 mm²/s |
| Base oil viscosity at 100 °C, calculated value | approx. 31.5 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer | approx. 3 000 mPas |
| Drop point, DIN ISO 2176, IP 396 | > 180 °C |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -25 °C | < 1 400 mbar |
| FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage | >= 12 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Hazard Statements (CLP)
Signal word: Warning.
Hazard Statements (H-Statements)
- H319: Causes serious eye irritation.
Precautionary Statements (P-Statements)
Prevention:
- P264: Wash skin thoroughly after handling.
- P280: Wear eye protection/face protection.
Response:
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337 + P313: If eye irritation persists: Get medical advice/attention.
Additional Labelling (EUH-Statements)
- EUH208: Contains dibutyl [[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Isaac –
Exactly what I was looking for. Perfect in every detail. Impeccable service. Super value for the money.
Pietro M. –
Perfect from start to finish. Very good experience. Perfectly packaged.
David Y. –
Would buy again. Feels sturdy. Impeccable quality. Works without any issues.
Charlotte –
This solved my problem completely! Looks even nicer in person.
James –
Met my expectations. Delivered earlier than expected.
Ellie G. –
A friend recommended it to me and I’m thrilled with the purchase. Better than anything I’ve tried so far. Perfect for my needs; I couldn’t be happier. Surprisingly good quality for the price.
stephane75 –
Fast and secure delivery.
harper23 –
I was skeptical, but now I’ll order regularly. Not too big, not too small, perfect. Looks even nicer in person.
salvatore88 –
Perfect job, thanks. Exactly what I needed. Exactly what I was looking for. Excellent quality.
Cédric –
Very durable.
Dylan –
No complaints. Just as it should be. Fast delivery and exactly as described.