WD-40 Specialist Anti-Friction Dry PTFE 400ml Smart Straw spray

WD-40 Specialist® Anti-Friction Dry PTFE 400ml Smart Straw spray

Anti-Friction Dry PTFE Lubricant is perfect for high use or repetitive mechanisms that require protection from daily wear and tear, such as door and window tracks, chains and rollers, power tools, drill bits and lock mechanisms. It’s quick-drying, and sets as a clear film that won’t attract damaging elements like dust, dirt and oil. It also makes an extremely effective mould release agent. It works through a range of temperatures, from -45°C to 260°C, and is safe to use on metals, glass and plastics.

Characteristics

• Lubricates with PTFE (Polytetrafluoroethylene)
• Quick dries to a clear film
• Won’t attract dust, oil or dirt
• Protects against wear and tear
• Works as a mould release agent

Field of application

• Loosening locks and latches
• Lubricating door and window tracks and hinges
• Improving performance of rollers, chains, cogs and cables
• Improving efficiency of power tool blades and drill bits
• Lubricating conveyor belts
• Lubricating thermoplastics and metal extrusions

Advantages of WD-40 Smart Straw

With the Smart Straw applicator, you’ve got two ways to spray; use the flip up straw for hard to reach areas, such as inside chains,

locks or rollers, then flip it down to use the wide angle spray eye for area coverage on surfaces. Whichever way you need to spray,

you can rely on the clever 360° valve to work efficiently at every angle, even upside down.

Technical specifications

• Appearance: Slightly cloudy, deep yellow liquid
• Odour: Pleasant lemon odour
• SG: 0.71 – 0.74
• Discharge rate: 0.6 – 1.2 g/s
• Temperature range: Effective performance at temperatures from -45 ºC to +260 ºC
• Solubility: Not miscible with water
• NSF category H2
• Flammability: Classed as extremely flammable under current legislation
• Compatibility: Suitable for most surfaces, including plastic, metal and glass
• Lubrication ASTM D-4172: Scar depth 0.43 mm
• Extreme pressure lubrication ASTM 3233: 2310 lb
• Corrosion protection ASTM B-117: 40 % at 24h 

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.
• H222: Extremely flammable aerosol.
• H229: Pressurised container: May burst if heated.

Safety Statements (P-phrases)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing vapours/spray.
• P273: Avoid release to the environment.
• P280: Wear protective gloves.

Response:

• P312: Call a POISON CENTER or doctor if you feel unwell.

Storage:

• P405: Store locked up.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C.

Disposal:

• P501: Dispose of contents/container to an approved waste disposal plant.

Other Hazards

• The mixture contains no vPvB substances (vPvB = very persistent, very bioaccumulative).
• The mixture contains no PBT substances (PBT = persistent, bioaccumulative, toxic).
• The mixture contains no substances with endocrine-disrupting properties.

WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, [email protected], www.wd40.de