Shop

Klüber STABURAGS NBU 30 PTM Lubricating grease spray can 250 ml

(9 customer reviews)

73,14 

STABURAGS NBU 30 PTM is an assembly grease with solid lubricant, providing corrosion protection and excellent water resistance for outdoor applications.

Quick Product Inquiry

Send us a quick inquiry for this product. We will reply with availability, pricing, and delivery information.

SKU: ID27bdc67e7b Category:

Description

Lubricating and assembly grease

  • STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribocorrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.
  • Content: 250ml spray

Benefits for your application:

  • Assembly grease protecting against tribo-corrosion
  • Good corrosion protection
  • Excellent resistance to water even under outdoor conditions
  • Approved by the company Knorr Bremse, N 12006-37

Application:

  • STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies.
  • STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods.
  • STABURAGS NBU 30 PTM facili-ates assembly and disassembly of ABS sensors in vehicles.

Application notes:

  • Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals.
  • When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush.
  • STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -40 °C.

Product data:

Article number 081275
Chemical composition solid lubricant
Chemical composition, thickener barium complex soap
Chemical composition, type of oil mineral oil
Lower service temperature -10 °C / 14 °F
Upper service temperature 160 °C / 320 °F
Colour space grey
Density at 20 °C approx. 1,10 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 490 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 31 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer approx. 15 000 mPas
Drop point, DIN ISO 2176, IP 396 >= 220 °C
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 60 months

Hazard Statements (CLP)

   

Signal word: Danger.

Hazard Statements (H-Sentences)
  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: May burst if heated.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long-lasting effects.
Precautionary Statements (P-Sentences)
Prevention:
  • P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P273: Avoid release to the environment.
Response:
  • P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
  • P331: Do not induce vomiting.
  • P391: Collect spillage.
Storage:
  • P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,
Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

9 reviews for Klüber STABURAGS NBU 30 PTM Lubricating grease spray can 250 ml

  1. riccardo_it

    Arrived on time. Fast and secure delivery.

  2. alexander88

    Well packaged and secure. Delivery faster than expected.

  3. Sophie

    Better than anything else I’ve tried before. No unpleasant smell, which I really appreciate. Feels nice to use at home.

  4. giulio88

    Feels durable and well built.

  5. chiara_sun

    Super fast delivery, thank you. Great product, worth every cent.

  6. Caroline E.

    I noticed a difference after a short time! I’ve been using it for 2 weeks and I already see results!

  7. Alessia

    I was skeptical, but now I’ll order regularly.

  8. Emma D.

    Easy to use, without making a mess. Very effective; noticed a change after just one week.

  9. claudia_it

    Very fast delivery, thank you.

Add a review

Your email address will not be published. Required fields are marked *