LUSIN MC1718 Powerful mould cleaner organic 400ml spray

Powerful cleaning agent for thermoplastics processing

Lusin® MC1718 is a highly active general cleaner, offering the thermoplastics industry significant performance improvement. It is especially applicable for removing tenacious polymer and other residues from metal surfaces.

Application

• Cleaning of dirty moulds
• Dissolving polymer residues, e.g., PVC, POM, polyamides, acrylates, etc.
• Polymer-based adhesives and glues
• Removal of resins, paints, additives, waxes, oils, greases, etc.

Characteristics

• Removes polymer residues
• Has a rapid cleaning effect
• Technologically sustainable and environmentally friendly
• Size: 400 ml
• Packaging type: Aerosol spray

Notes

• Lusin® MC1718 attacks plastic and painted surfaces
• Spray Lusin® MC1718 on contaminated moulds, allow the product to react and then remove it by producing parts (they will initially show affected surfaces). The product can also be removed by using a cloth wipe. If required, the procedure can be repeated several times at increased temperatures and longer reaction time (1 hour maximum).
• In case of production stoppage, after having cleaned the surface with Lusin® MC1718, a mould protectant (anticorrosion agent) like Lusin® Protect G 31 F (if NSF compliance is required) should be applied; in all other cases Lusin® Protect G 31 or Lusin® Protect G 11 can be used.

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H222: Extremely flammable aerosol.
• H229: Pressurised container: May burst if heated.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.

Safety Statements (P-phrases)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P264: Wash skin thoroughly after handling.
• P280: Wear protective gloves/eye protection/face protection.

Storage:

• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.

Other Hazards

• This substance/mixture does not contain components at concentrations of 0.1% or higher classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
• This substance/mixture does not contain components classified as endocrine-disrupting properties under REACH Article 57(f) or related regulations.

Chem-Trend (Deutschland) GmbH, Ganghoferstr. 47, 82216 Maisach-Gernlinden, GERMANY, +49 8142 417-0, [email protected], www.chemtrend.com