Tempil Bloxide Weldable primer 1 gallon (3,8L)

Bloxide®is a versatile, rust-preventive, weldable primer with a unique formula that can be applied to a wide range of metals, preventing the formation of rust and corrosion during extended periods of storage. Bloxide eliminates the need to clean metal surfaces before welding due to its enhanced corrosion preventative features, thus saving time and labor costs during fabrication. Bloxide is a completely weldable primer, also improving the weld quality after application, resulting in X-Ray quality welds.

• Ideal for extended periods of outside steel storage
• Ability to strike welding arc without removal
• Temperature resistant to 800°F (427°C)
• Aluminized finish
• Dry time is 6 hours for around 77°F and 50% relative humidity/tack free  conditions
• Recommended film thickness:  wet 3.0 mil, dry 0.75 mil
• Standard packaging: 1 gallon (about 3,8L)
• Can be sprayed, brushed or parts can be dipped into it

Quick application and accurate results:

• Simply apply Bloxide by brush, dip or spray with no special equipment or training.
• Coverage is up to approximately 800 square feet per gallon.
• Industry-safe and free from lead, sulfur, zinc and other halogens, Bloxide is an excellent primer for a wide range of applications.

Applications:

• Marine and offshore fabrication, almost all steels, primer for paints and coatings, and many more uses.  

Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]

Hazard pictograms (CLP) :
GHS02 GHS07 GHS08
Signal word (CLP) : Danger
Hazardous ingredients : formaldehyde; Stoddard solvent (benzene < 0.1%); cobalt bis(2-ethylhexanoate); Xylene;
ethylbenzene; Solvent naphtha (petroleum), light aliph (benzene < 0.1%)
Hazard statements (CLP) : H226 – Flammable liquid and vapour
H304 – May be fatal if swallowed and enters airways
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H332 – Harmful if inhaled
H350 – May cause cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (CLP) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P260 – Do not breathe mist, spray, vapours
P264 – Wash hands thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing should not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P301+P310 – If swallowed: Immediately call a poison center or doctor
P302+P352 – IF ON SKIN: Wash with plenty of water
P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing.
Rinse skin with water/shower
P304+P340 – IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a poison center or doctor if you feel unwell
P321 – Specific treatment (see First aid measures on this label)
P331 – Do NOT induce vomiting
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362+P364 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), foam, sand to extinguish
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation

LA-CO Industries Europe S.A.S., 465 All. des Combes, 01150 Blyes, FRANCE, +33 4 74 46 23 23, [email protected]. www.lacoindustries.com