Klüberpaste UH1 96-402 High-temp paste for food-processing 400ml spray

Klüberpaste UH1 96-402 Spray Light-coloured high-temperature paste for the food-processing and pharmaceutical industries | N° 081254

• Klüberpaste UH1 96-402 is a high-temperature paste designed for versatile assembly purposes in hygienically sensitive environments. It contains fully synthetic base oils and a special blend of ceramic solid lubricants.
• Across the “normal” temperature range up to approx. 160 °C, Klüberpaste UH1 96-402 is a water-resistant lubricating and assembly paste providing good adhesion on metals.
• Under permanently higher temperatures up to 1200 °C, its solid lubricating particles provide protection against tribocorrosion or fretting corrosion.
• Temperature range: -30°C to +1200°C 
• Volume: 400ml spray can
• Also available in: 600g cartridge, 750g can, 30kg pail

Benefits for your application

• Reliable dry lubrication at temperatures from 200 °C to 1200 °C
• Good adhesion to the friction point, also when subject to humidity

Applications

• Klüberpaste UH1 96-402 Spray is suitable for a variety of friction points in food-processing and pharmaceutical machines which are subject to high loads –
  • as an assembly paste for transition and loose fits to prevent fretting corrosion
  • as a paste for screw connections based on high-alloy steels to optimise the tightening torque and demounting, even after long operating periods
  • as a long-term lubricant for low-speed guide rails, hinges, rollers, etc.

Application notes

• Shake well before use. Ensure sufficient ventilation during spraying as explosive mixtures may form.
• Do not spray against naked flame or onto hot or incandescent objects.
• Do not use spray in confined areas, e.g. control cabinets.
• Observe additional instructions for use in material safety data sheet and on can label. Before applying Klüberpaste UH1 96-402 Spray, all lubrication points should be thoroughly cleaned using e.g. Klüberfood NK1 Z 8-001 Spray, to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication. Protect product against direct sunlight and temperatures above 50 °C.

Technical specifications

Hazard Information (CLP)

Signal word: Danger

Hazard Statements (H-Sets)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst when heated.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-Sets)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P273: Avoid release to the environment.

Response:

• P301 + P310: IF SWALLOWED: Immediately call Poison Center/Doctor.
• P331: Do NOT induce vomiting.

Storage:

• P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com