Description
Lubricating and assembly paste
- ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
- Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.
- Content: 400ml spray
Benefits for your application:
- Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product
- Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion
- High pressure absorption capacity enables constant clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks
Application:
- ALTEMP Q NB 50 can be used for the assembly of frictional connections, e.g. annular springs or split taper sleeves, and positive connections, e.g. bearing seats, profiled guides, etc.
- The product has proven particularly successful in the lubrication of clamping chucks. High precision and constant clamping forces are essential requirements in chucks. Any decrease of the clamping force may cause tools or workpieces to become loose.
- ALTEMP Q NB 50 improves the sliding behavior of moving chuck components, enables constant clamping forces and may therefore be used in all types of chucks, such as scroll, cam and spiral chucks. It prevents stick-slip and protects against triboand fretting corrosion in frictional or positive connections.
- Furthermore, ALTEMP Q NB 50 is resistant to water and media, e.g. against cooling lubricants.
Application notes:
- Clean and degrease the surfaces thoroughly. Then apply the paste in a thin, coherent layer by means of a brush or cloth that does not fray (do not rub in). ALTEMP Q NB 50-Spray can be used to facilitate application.
Product data:
| Article number | 081038 |
| Lower service temperature | -15 °C / 5 °F |
| Upper service temperature | 150 °C / 302 °F |
| Chemical composition | solid lubricant |
| Chemical composition, thickener | barium complex soap |
| Chemical composition, type of oil | mineral oil |
| Texture | almost homogeneous |
| Texture | fibrous |
| Color space | white |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 250 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 270 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 46 mm²/s |
| Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C | 1 – 100 corrosion degree |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water |
<= 1 corrosion degree |
| Four-ball tester, welding load, DIN 51350 pt. 04 | >= 4 000 |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 7 000 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 13 000 mPas |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Hazard Statements (CLP)
Signal word: Danger.
Hazard Statements (H-Sentences)
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long-lasting effects.
Precautionary Statements (P-Sentences)
Prevention:
- P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
Response:
- P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
- P331: Do not induce vomiting.
Storage:
- P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
audrey_heart –
I was skeptical, but now I order regularly. No unpleasant smell, which I really appreciate.
Benoît –
Simply excellent. Everything OK, recommended. Fast shipping and good quality. Recommended.
pascal75 –
Very fast shipping. No reason to complain.
selina_ma –
Very effective; I noticed a change in just one week. Perfect for my needs; I couldn’t be happier. A friend recommended it and I’m so glad I ordered.
cecilia_s –
Feels nice to use at home.
isabella_it –
It completely solved my problem! Very effective; noticed a change after just one week. Easy to use, without making a mess. Better than anything I’ve tried so far.
aurora_s –
Packaging was slightly damaged, but the product is excellent. Great product, worth every cent.
Alberto S. –
Excellent material.
audrey_fr –
Packaging slightly damaged, but the product is excellent.