Delo-ML 5327 High-Strength Metal Adhesive heat resistant to 200°C 50g

DELO-ML® 5327 is a high-strength, anaerobically curing 1-component adhesive based on acrylate, designed for securing and sealing metallic threaded connections at temperatures up to +200 °C.

• Pack size: 50 g plastic bottle
• Also available in: 200 g bottle

Applications

• Permanent thread locking in machinery, engines, and housings
• Sealing of metallic threads in hydraulic, pneumatic, and piping systems
• Form-fit bonding of shaft-hub connections (e.g., gears, bearings, bushings)
• Mounting of rotational components under high temperature and shear load
• Secure bonding even on slightly oily metal surfaces (based on application testing)

Features

• High compressive and tensile shear strength
• Fast fixture time: 2-4 min (zinc-phosphated), 20 min (V2A with activator)
• Solvent-free, unfilled, RoHS- and VOC-compliant
• Temperature resistant up to +200 °C

Technical Data

* All values determined under lab conditions at 23 °C / 50% RH. Application-specific testing recommended.

Curing

• Fixture time (zinc-phosphated): 2-4 minutes
• Fixture time (V2A with DELO-QUICK 5002): approx. 20 minutes
• Final strength: approx. 24-72 hours

Processing

• Typical layer thickness: 0.05-0.1 mm (up to 0.4 mm with activator)
• Apply directly from bottle or using dispensing equipment
• Surfaces should be clean, degreased, and ideally roughened

Recommended Accessories

• Activator: DELO-QUICK® 5004 – 150ml Spray
• Cleaner: DELOTHEN® NK1 – 400 ml spray

Storage & Shelf Life

• Shelf life unopened: 6 months at 0-25 °C, 12 months at 0-10 °C
• Store cool, dry, protected from light, and in original packaging

DELO-ML 5327, ML5327, ML-5327

Hazard Identification (CLP)

Signal word: Danger.

Hazard Statements (H-Sentences)

• May cause allergic skin reactions.
• Causes severe eye damage.
• May cause respiratory irritation.
• Toxic to aquatic organisms, with long-lasting effects.

Precautionary Statements (P-Sentences)

Prevention:

• Wear protective gloves (1-4 hours breakthrough time: recommended Viton® fluoroelastomer / short-term exposure < 15 min nitrile gloves).
• Wear eye protection or face protection.
• Avoid release to the environment.
• Avoid inhaling vapor.

Response:

• If inhaled: Seek medical advice if feeling unwell, call a Poison Center or a doctor.
• Remove contaminated clothing and wash before reuse.
• If on skin: Wash with plenty of water and seek medical advice if irritation occurs.
• If in eyes: Rinse carefully with water for several minutes. Remove contact lenses if possible. Continue rinsing and immediately call Poison Center.

Storage and Disposal

• Store in a well-ventilated place. Keep container tightly closed.
• Dispose of contents and container in accordance with local, regional, national, and international regulations.

Other Relevant Information

• Contains: 7,7,9(or 7,9,9)-Trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecan-1,16-diylbismethacrylate, methacrylic acid, 2-hydroxyethyl methacrylate, acrylic acid, 2′-phenylacetohydrazide.

DELO Industrie Klebstoffe GmbH & Co. KGaA, DELO-Allee 1, 86949 Windach, GERMANY, +49 8193 9900-0, [email protected], www.delo.de