Perma CLASSIC 120 Single-point lubricator with Klübersynth CH 2-100 N

Perma CLASSIC 120 Lubricant dispenser with Klübersynth CH 2-100 N | N° 113499

Kluebersynth CH 2-100 N High-temperature chain oils

• Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 °C
• Good wear protection results in extended chain life even at temperatures above 200 °C
• Clean chains and easy relubrication due to low residue formation
• No mechanical cleaning of chains required
• Low energy consumption due to low chain friction and good lubricant film formation
• Paint-compatible raw materials to avoid paint defects and reworking
• The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. 
• For detailed information view our datasheet here

Technical specifications

• Chemical composition, type of oil: ester oil
• Lower service temperature: 0 °C / 32 °F
• Upper service temperature: 250 °C / 482 °F
• Appearance: clear
• Colour space: yellow
• Density, DIN 51757, 20 °C: approx. 0.91 g/ cm³ 

Applications

• The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures.
• Applications of this kind are found, for example, in the surface treatment and coating of industrial goods.

Perma CLASSIC 120 Automatic lubrication system

• Perma CLASSIC is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.
• Operates at ambient temperatures between 0 up to +40 °C.
• Typical applications can be found in mining, steel, automotive and mechanical engineering.
• The reliable operating principle is based on an electrochemical reaction.
• The lubrication period is determined by color coded activator screws.
• Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.
• The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication point
• Perma CLASSIC is fully dust and water proof and can withstand impacts and accidental knocks.

Note: For each Classic 120 dispenser you need an activator screw, which you can order under the links below:
 

perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0, [email protected]