Perma CLASSIC 120 Single-point lubricator with grease Mobil Unirex N3

Perma CLASSIC ​​Mobil Unirex N3 120 cm³ automatic single-point lubricator with high temperature bearing grease | N° 100250

​​Mobil Unirex N3 High temperature bearing grease

• Premium-quality, lithium-complex product suitable for high-temperature service in rolling-element bearings
• These versatile greases can be used in a wide range of industrial applications and are particularly recommended for electric-motor lubrication.
• Unirex N greases exhibit excellent high and low temperature performance, resistance to water and corrosion, and long service life in a range of bearing applications.
• For detailed information view our datasheet here

Technical specifications

• Grade: NLGI 3
• Thickener Type: Lithium Complex
• Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697: 115
• Color, Visual: Green
• Dropping Point, °C, ASTM D2265: 210
• Oil Separation, 30 h @ 100 C, mass%, ASTM D6184 : 0.6
• Penetration, 100 KX, 0.1 mm, ASTM D217: 30
• Penetration, 60X, 0.1 mm, ASTM D217: 235
• Viscosity Index, ASTM D2270: 95
• Water Resistance, 1 h @ 79 C, wt%, ASTM D1264: 3.5

Applications

• These versatile greases can be used in a wide range of industrial applications and are particularly recommended for electric-motor lubrication.
• Unirex N greases exhibit excellent high and low temperature performance, resistance to water and corrosion, and long service life in a range of bearing applications

Perma CLASSIC 120 Automatic lubrication system

• Perma CLASSIC is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.
• Operates at ambient temperatures between 0 up to +40 °C.
• Typical applications can be found in mining, steel, automotive and mechanical engineering.
• The reliable operating principle is based on an electrochemical reaction.
• The lubrication period is determined by color coded activator screws.
• Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.
• The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication point
• Perma CLASSIC is fully dust and water proof and can withstand impacts and accidental knocks.

Note: For each Classic 120 dispenser you need an activator screw, which you can order under the links below:
 

perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0, [email protected]