Shop

Weicon Copper Paste KP 1000 for high temperatures up to 1100 °C – 1kg

(5 customer reviews)

47,94 

WEICON KP 1000 Copper Paste is a high-temperature and corrosion-resistant lubricant for highly stressed parts, providing strong adhesion and protection.

Quick Product Inquiry

Send us a quick inquiry for this product. We will reply with availability, pricing, and delivery information.

SKU: ID5aeddc9523 Category:

Description

WEICON KP 1000 Copper Paste
  • Protection, release, and lubricant for highly stressed parts at high temperatures
  • High-temperature and corrosion resistant
  • Strong adhesion
  • Sulphur, lead, and nickel-free
  • Temperature resistance: -20 °C to 1100 °C
  • Pack size: 1 kg can
  • Available sizes: 30 g, 120 g, 0.4 kg, 0.45 kg, 0.5 kg, 85 g, 10 kg
Surface pre-treatment
  • To achieve optimum results, the mounting parts should be degreased and cleaned, e.g. with WEICON Surface Cleaner (roughen the surfaces, if required).
  • For used screws, treat with a wire brush and clean with WEICON Cleaner S.
  • WEICON Copper Paste can also be used on uncleaned surfaces, e.g. screws as delivered. However, the cleaner the surface, the better the results achieved.
Processing
  • Clean and degrease surfaces with WEICON Spray Cleaner S.
  • Apply Copper Paste evenly with a brush, cloth, or sponge.
  • For screws, it is important that the Copper Paste is applied down to the thread root and under the screw head to ensure a good sealing effect.
  • To avoid altering the properties, Copper Paste must not be mixed with greases or oils.
  • Copper Paste does not replace oil or grease lubrication.
Storage
  • Keep tightly closed in original packaging.
  • Do not store together with oxidizing agents.
  • Keep container tightly closed and store in a cool, well-ventilated place.
  • Shelf life: 24 months
Instructions for use
  • When using WEICON products, the physical, safety-related, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.
Technical specification
Consistency classification (DIN 51818) NLGI-Class 1
Base Mineral oil
Solid lubricant Copper powder/Graphite
Density (DIN 51757) 1.1 g/cm³
Silicone-free yes
VKA-Test Good Load (DIN 51350) ON
VKA-Test Weld Load (DIN 51350) 3,200 N
VKA-Test Calotte Value (DIN 51350, 1Min/1000N) 0 mm
Worked Penetration (DIN ISO 2137) 310-340 1/10 mm
Heat Capacity (DIN EN ISO 22007-4) 1.713 J/(g-K)
Thermal Conductivity 0.392 W/m-K
Dielectric Strength (DIN EN 60243-1 (20°C)) 1.7 kV/mm
Drop Point (IP 396) +180 °C
Base Oil Viscosity (40°C) (DIN 51562) 180 mm²/s
Thermal Diffusivity 0.208 mm³/s
Temperature resistance -20 °C to 1.100 °C
Shelf life 24 months
Thickener Alu-Complex-Soap
Friction values
Friction values plain steel (M10 10.9)  
Total friction coefficient 0.13 (min. 0.11)
Thread friction coefficient 0.14 (min. 0.13)
Head friction coefficient 0.12 (min. 0.10)
Friction values V4A (M10 | A4 70)  
Total friction coefficient 0.16 (min. 0.13)
Thread friction coefficient 0.16 (min. 0.12)
Head friction coefficient 0.16 (min. 0.13)
Friction values galvanized steel (M10 | 10.9)  
Total friction coefficient 0.10 (min. 0.09)
Thread friction coefficient 0.11 (min. 0.10)
Head friction coefficient 0.09 (min. 0.08)
Approvals / Guidelines IMPA-Code: 450888/89/90/91/92

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-phrases)
  • H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements (P-phrases)
Response:
  • P391: Collect spillage.
Storage:
  • Not applicable.
Disposal:
  • P501: Dispose of contents/container in accordance with local regulations.
Prevention:
  • P273: Avoid release to the environment.
Additional Labelling (EUH-phrases)
  • Not applicable.
Other Relevant Information
  • Annex XVII – Restrictions on the manufacture, placing on the market and use of certain dangerous substances: Not applicable.
Information on product safety (Manufacturer, Contact)

WEICON GmbH & Co. KG, Königsberger Strasse 255, 48157 Münster, GERMANY, +49 251 9322-0, [email protected], www.weicon.de

5 reviews for Weicon Copper Paste KP 1000 for high temperatures up to 1100 °C – 1kg

  1. giuseppe_it

    Robust and well-made. Perfectly packaged. Everything OK, recommended.

  2. lucy_sun

    The quality surprised me in a good way. Not too big, not too small, perfect. Not too big, not too small, just perfect. I noticed the difference right away!

  3. ethan_sky

    Very practical and easy to use.

  4. hannes_s

    Perfect from start to finish.

  5. Florian G.

    Great service, thank you. Everything as expected. Great item.

Add a review

Your email address will not be published. Required fields are marked *