WD-40 Specialist Rust remover 100ml spray can

WD-40 Specialist® Rust remover 100ml spray can

WD-40 Specialist Penetrant is a fast-acting penetrant with capillary action to penetrate deep into crevices, threads and seams to break the rust bonds that hold stuck parts together. It is a low odor formula that works on contact to free rusted nuts, bolts, threads, locks, and chains leaving behind a protective layer that prevents rust and corrosion from re-forming.

Characteristics

• Fast-Acting
• Works on Contact
• Low Odor
• No Prop 65 Chemicals
• Frees rusted parts 50% faster than the leading competitor
• 50-state VOC Compliant 

Field of application

• Nuts
• Bolts
• Pipe Threads
• Locks • Chains
• Rusted Parts
• Stuck Components

Technical specifications

• Appearance: Slightly cloudy, beige liquid
• Density: 0.75-0.77
• Spray force: 0.8 – 1.4g / s
• Operating temperature range: -20 ° C to + 90 ° C
• Solubility: Insoluble in water
• Flammability: Extremely flammable
• Material compatibility: metal, alloys, rubber, plastic
• ASTM D-4172 (Four Ball Test; Lubricity): 0.69mm
• ASTM B-117 (salt spray test): 30% after 72 hours
• Surface tension: 23nN / m
• Nail climbing test (capillary action): 5cm in 10 minutes
• Contact angle (steel): 0 ° (less is better)

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.
• H222: Extremely flammable aerosol.
• H229: Pressurised container: May burst if heated.

Safety Statements (P-phrases)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing vapours/spray.
• P273: Avoid release to the environment.
• P280: Wear protective gloves.

Response:

• P312: Call a POISON CENTER/doctor if you feel unwell.

Storage:

• P405: Store locked up.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.

Disposal:

• P501: Dispose of contents/container to an approved waste disposal plant.

Other Hazards

• Formation of explosive mixtures possible without sufficient ventilation.
• The mixture contains no vPvB substances.
• The mixture contains no PBT substances.
• The mixture contains no substances with endocrine-disrupting properties.

WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, [email protected], www.wd40.de