Sika Primer-206-G+P Moisture-curing primer 1000 ml

Technical characteristics:

• Chemical Type: pigmented, solvent-based adhesion promoter undercoat
• Color: black
• Density (DIN 51757 / ISO 2811-1): 1.0 kg / l
• Flash point (DIN 51755 / ISO 13736): -4°C
• Solid content: 36%
• Working temperature: + 5°C to + 40°C
• Application method: Brush / felt / foam applicator
• Consumption: about 50-150 ml / m2 depending on surface porosity
• Flash-off time:  ≥ 15°C: 10 minutes;  <15°C: 30 minutes; maximum: 24 hours
• Storage: sealed at ≤ 25°C, upright, away from moisture and sunlight
• Shelf life: 9 months

Description:

• Sika Primer-206 G + P is a black, moisture-curing primer for pretreatment of the bonding surfaces, especially for direct glazing with Sika polyurethane adhesives.
• Sika Primer-206 G + P is made by the quality assurance system ISO 9001/14001 and the Responsible Care program.

Scope:

• Sika Primer-206 G + P is used for the adhesion improvement in adhesive applications on glass and ceramic-coated glass, painted surfaces, plastics and metals.
• This product is suitable only for experienced users. In order to ensure adhesion and material compatibility, preliminary tests must be carried out with the original materials under the respective conditions.

Processing:

• The surface must be clean, dry, dust and grease.
• The adhesion can be improved by additional pretreatment steps such as grinding, cleaning and activation.
• Surfaces with Sika activator (or another approved pretreatment agents) wipe and allow to dry.
• Sika Primer-206 G + P Shake very well until the steel balls in the container is good to hear. In addition, shake for a minute.
• The product can be applied by brush, felt or foam applicator. Sika Primer-206 G + P uniformly thin, but applicator.
• The ideal temperature is 15°C – 25°C.
• Apply the primer only once. Make sure that the layer is uniform and opaque.
• Immediately close the container tightly after use.

Hazard Statements (CLP)

Signal word: Danger.

Hazard Statements (H-Sentences)

• H225: Highly flammable liquid and vapour.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Additional Hazard Statements

• EUH066: Repeated exposure may cause dry or cracked skin.

Precautionary Statements (P-Sentences)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P261: Avoid breathing mist or vapour.
• P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.

Response:

• P303 + P361 + P353: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
• P370 + P378: In case of fire: Use dry sand, powder, or alcohol-resistant foam to extinguish.

Sika Deutschland GmbH, Kornwestheimer Str. 103-107, 70439 Stuttgart, GERMANY, +49 711 8009-0, [email protected], www.sika.com