Perma PRO LC500 Lubricant cartridge with grease Tribol GR 100-2 PD

Perma PRO LC500 Lubricant cartridge with Tribol GR 100-2 PD | N° 111724

Castrol Tribol GR 100-2 PD High performance bearing greases

• ​Castrol Tribol™ GR 100 PD (previously called Longtime™ PD) is a range of lithium based greases containing highly refined mineral oils, enhanced with the MicroFlux Trans (MFT) additive system.

Technical specifications

•  Appearance: Brown
•  Thickener type: Lithium
•  Base oil:  Mineral oil
•  Consistency NLGI Grade: 2
•  Density @ 20 °C/68 °F  kg/m³: 890
•  Worked Penetration (60 strokes @ 25 °C/77 °F): 265-295
•  Base Oil Viscosity @ 40 °C/104 °F: 95
•  Flow pressure @ -35 °C/-31 °F  hPa: 1200

Applications

• The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings.
• Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates.
• These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. 

---

​Perma PRO ​Multi-Point Lubrication Systems:​

PRO MP-6

• PRO MP-6 is a battery operated multi-point lubrication system.
• The MP-6 distributor discharges directly without pressure loss and enables tube extensions up to 5 m. 
• PRO MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots.
• Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
• Power supply: Battery PRO B

PRO C MP-6

• PRO C MP-6 can also be operated in IMPULSE mode.
• The impulse for a lubricant discharge can be PLC controlled.
• Power is supplied via the machine and can be PLC monitored and controlled.
• PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots.
• Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
• Power supply: External: 15-30 V

PRO LINE

• PRO LINE is a special multi-point lubrication system for linear guides. 
• Main applications for the multi-point lubrication system perma PRO LINE are linear guides.
• Application fields range from various linear guide and drive units in all kinds of industries – from automotive to paper. Other applications are roller and sliding bearings, open gears and spindles.
• Power supply: Battery PRO B

PRO C LINE

• PRO C LINE is a special multi-point lubrication system with 1 – 6 outlet connections for linear guides
• PRO C LINE receives its power from the machine and can be monitored and controlled via PLC.
• Main applications for the multi-point lubrication system perma PRO C LINE are linear guides.
• Application fields range from various linear guide systems and drives in the automotive industry to the paper industry. Other applications are roller and sliding bearings, open gears and spindles.
• Power supply: External: 15-30 V

---

Hazard Information (CLP)

Signal word: Warning.

Hazard statements (H-phrases)

• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic life with long lasting effects.

Precautionary statements (P-phrases)

Prevention:

• P280: Wear protective gloves.
• P273: Avoid release to the environment.
• P261: Avoid breathing dust.

Response:

• P362 + P364: Take off contaminated clothing and wash it before reuse.
• P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
• P333 + P313: If skin irritation or rash occurs: Get medical attention.

Disposal:

• P501: Dispose of contents and container in accordance with all local, regional, national, and international regulations.

Supplemental label elements

Not applicable.

Hazardous ingredients

• Reaction product of ammonium molybdate and C12-C24-diethoxylated alkylamine (1:5-1:3).
• Reaction products of triphenyl phosphite and isodecanol (1:1).
• 2,6-di-tert-butyl-4-nonylphenol.

Information on product safety (Manufacturer, Contact)

perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0, [email protected]