OKS 511 Dry film MoS2 lubricant fast-drying 400ml spray

OKS 511 Spray is an air-drying MoS₂-based lubricant coating used for dry lubrication of machine elements during temporary operation and long standstill periods.

Field of application

• Run-in lubrication in combination with oil or grease lubrication
• Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation
• Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds
• Dry lubrication in dusty environment, to avoid adhesions
• Coating of punching tools

Properties

• Highly effective due to good adhesion to prepared substrates
• Allows a low coefficient of sliding friction also under heavy loading
• Increased wear protection
• Radiation and vacuum-resistant
• Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs

Technical Data

• Lower operating temperature: -180°C 
• Upper operating temperature: 450°C 
• Flashing point < 65 (< 5°C): -30°C 
• Surface covering: 10-50 m²/can 
• Density (at 20°C): 0.96 g/cm³
• Colour: grey-black
• Size: 400ml
• Packaging type: aerosol spray
• Also available in: 500g can, 5kg hobbock, 25kg hobbock (OKS 510)

Industries​

• Iron and steel industry
• Rubber and plastic processing
• Chemical industry
• Logistics
• Paper and packaging industry
• Rail vehicle technology
• Glass and foundry industry
• Plant and machine (tool) engineering
• Municipal services
• Shipbuilding and marine technology

 

---

Hazard Identification (CLP)

  

Signal word: Danger.

Hazard Statements (H-Sentences)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H412: Harmful to aquatic life with long-lasting effects.

Precautionary Statements (P-Sentences)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray near an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.

Response:

• P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P331: Do not induce vomiting.

Storage:

• P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.

Hazardous Components for Labeling:

• Hydrocarbons, C6-C7, n-Alkanes, Isoalkanes, Cyclics, <5% n-Hexane.

Information on product safety (Manufacturer, Contact)

OKS Spezialschmierstoffe GmbH, Ganghoferstr. 47, D-82216 Maisach-Gernlinden, +49 8142 3051 500, [email protected], www.oks-germany.com