Loctite AA 334 Acrylic glue for magnet bonding in electric motors 25ml

LOCTITE AA 334 (Loctite 334) is a light yellow, 1-part, two step acrylic, high viscosity, dual-cure, thixotropic, modified acrylic, magnet bonding adhesive. Heat can be used to effect or accelerate cure when surface priming operations are undesirable.

• Pack size: 25 ml cartridge (Loctite no. 247075)
• Also available in: 300 ml cartridge 

Application

• Securing permanent magnets in motor magnet bonding applications
• This product is primarily used for magnet bonding, but may also be used for general metal bonding

Characteristics 

• Provides a tough flexible bond on gaps up to 0.02 in

• Used in conjunction with LOCTITE 7387 DEPEND ACTIVATOR or LOCTITE 7380 DEPEND ACTIVATOR, LOCTITE 334
• Has demonstrated the ability to provide tough, durable bonds with outstanding impact and peel resistance

Technical Information

LOCTITE AA334, LOCTITE AA-334

Hazards (CLP)

Signal word: Danger.

Hazard statements (H-statements)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H331: Toxic if inhaled.

Precautionary statements (P-statements)

Prevention:

• Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
• Avoid breathing vapors, mist, or spray.
• Wash thoroughly after handling.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing should not leave the workplace.
• Wear protective gloves, eye protection, and face protection.

Response:

• IF ON SKIN: Wash with plenty of soap and water.
• IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing.
• Immediately call a poison control center or physician.
• If skin irritation or rash occurs: Get medical attention.
• Take off contaminated clothing.
• In case of fire: Use foam, dry chemical, or carbon dioxide to extinguish.

Storage:

• Store in a well-ventilated place. Keep container tightly closed.
• Keep cool.
• Store locked up.

Disposal:

• Dispose of contents/container in accordance with Federal, State/Provincial, and local regulations.

Storage and disposal

• Store in well-ventilated areas.
• Use labeled containers and dispose of per regulations.

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com