Loctite 675 Retaining Compound slow curing high strength green 50 ml

LOCTITE® 675 is a green, very low viscosity, high strength, slow curing methacrylate retaining compound. Fixture time on steel is 45 min. Maximum diametrical clearance is 0.1 mm and service temperature -55 to + 150ºC. 

• Pack size: 50 ml bottle (Loctite no. 234940)
• Also available as: 250 ml bottle

Application

• Locks bearings on shafts and in housings.
• Bonds sleeves, wear rings and bushings in place.
• Augments press fits.
• Bonds pivot pins, adapters and plugs in place.
• Seals mechanical fits that have small clearances

Characteristics

• High strength, very low viscosity
• 1-part product, requires no mixing
• Slow curing
• Ideal for close fitting press fits
• Also for loose fitting slip fits

Technical Information

Hazard Information (CLP)

Signal word: Danger.

Hazard Statements

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.
• H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements

For consumer use only:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P501: Dispose of waste and residues in accordance with local authority requirements.

Prevention:

• P261: Avoid breathing vapors.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/eye protection.

Response:

• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P302+P352: IF ON SKIN: Wash with plenty of soap and water.

Additional Labeling

No additional information.

Storage and Disposal

• No special requirements when used properly.

Hazard Classification

Label Elements

SDS No.: 450729 | Version: V001.3 | Product: LOCTITE 680 RC

Signal Word: Danger

Hazard Statements

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.
• H411: Toxic to aquatic life with long-lasting effects.

Precautionary Statements

Prevention:

• P261: Avoid breathing mist/vapors.
• P264: Wash hands thoroughly after handling.
• P271: Use only outdoors or in a well-ventilated area.
• P272: Contaminated work clothing should not be allowed out of the workplace.
• P273: Avoid release to the environment.
• P280: Wear protective gloves, eye protection, and face protection.

Response:

• P302+P352: IF ON SKIN: Wash with plenty of water.
• P304+P340+P312: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.
• P305+P351+P338+P315: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing. Get immediate medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P391: Collect spillage.

Storage:

• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P405: Store locked up.

Disposal:

• P501: Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations.

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com