Description
Klübertemp GR M30 Long-term greases based on perfluorinated polyether | N° 090177
- Klübertemp GR M greases are white, odourless, long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener.
- The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range. Klübertemp GR M greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materials.
- Content: 10kg bucket
Benefits for your application
- Long component life
- Over a wide service temperature range
- In contact with aggressive media
- WWwhere sensitive plastic materials are used
Application
- Klübertemp GR M greases are preferably used for the lubrication of electromechanical actuators, small gears and seals where they show low breakaway torques, exceptionally low friction values as well as a reduced tendency to stickslip.This leads, for example, to lower frictional heating of elastomers subject to dynamic loads and hence longer component life.
Application note
- For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Then blow the surfaces with clean, dry air or hot air to remove solvent residues.
- For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination. Klübertemp GR M greases may be applied directly or by means of brush, spatula or lubricant dispenser.
Technical specifications
| Chemical composition, type of oil | PFPE |
| Lower service temperature | -60 °C / -76 °F |
| Upper service temperature | 200 °C / 392 °F |
| Colour space | white |
| Density at 20 °C | approx. 1.94 g/cm³ a |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C |
approx. 160 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C |
approx. 45 mm²/s |
| Evaporation loss, ASTM D 2595 22h/204°C | <= 2 % by weight |
| Texture | homogeneous |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Annika –
Perfect for my needs; I couldn’t be happier. Not too big, not too small, just perfect. Excellent product, worth every cent.
james_88 –
Excellent service. As expected, top-notch.
Adrien –
Perfect in every detail. Excellent workmanship. Everything perfect and fast.
Lena P. –
Perfect for my needs; I’m very satisfied. Great product, worth every cent. Excellent product, worth every cent.
leah_blossom –
Surprisingly good quality for the price. I noticed the difference right away! I was skeptical, but now I order regularly. Very satisfied, better than I expected.
Rachele –
Great product, worth every cent. Surprisingly good quality for the price. I’ve been using it for 2 weeks and I already see results! Looks even nicer in person.
Lotta –
Been using it for 2 weeks and already see results! Better than anything else I’ve tried before.
sofia_roma –
The quality pleasantly surprised me. I noticed the difference right away! A friend recommended it; I’m very happy with the purchase.
olivier_75 –
As expected, top-notch. Everything as described. Works without any issues. Practical and functional.
jannis88 –
Perfect match with the description. Very practical. Would buy again. Good quality at a fair price.
nataliejoy –
Looks even nicer in real life. A friend recommended it and I’m so glad I ordered.
Alberto L. –
Product as described. Easy to assemble. Very fast shipping. No complaints.