Description
Klüberlub PHB 71-461 High-temperature lubricating grease | N° 020508
- Klüberlub PHB 71-461 is a special high-temperature lubricating grease based on mineral oil and polyurea. It is suitable for a wide service temperature range and can be used up to 180°C under continuous relubrication conditions.
- Klüberlub PHB 71-461 may be applied via centralized lubrication equipment.
- Klüberlub PHB 71-461 incorporates special EP additives ensuring good wear protection under high load conditions.
- Temperature range: -10°C to +180°C
- Volume: 25 kg bucket
- Also available in: 400 g cartridge, 180 kg barrel
Benefits for your application
- High-temperature lubricating grease for rolling bearings up to 180°C
- For low to medium speeds
- Good pumpability in most commercially available lubrication systems
- Blue colour, hence less risk of confusion / mixing etc.
- Good wear protection and high load-carrying capacity
- Good corrosion protection
- Resistant to water
Applications
- Klüberlub PHB 71-461 was especially designed for high temperature applications in continuous fibreboard presses.
- The grease is used for the lubrication of drum bearings, guide rollers, shaft bearings and plain bearings in Siempelkamp and Dieffenbacher fibreboard manufacturing equipment.
- Further applications include high-temperature lubrication points subject to high loads, moisture and temperature variations such as those found in:
- conveyors
- dryers
- steel mills
Application notes
- Klüberlub PHB 71-461 can be applied via most commercially available centralized lubrication systems.
- The product should be continuously purged through small bore pipes, which are exposed to high pressure and temperature
Technical specifications
| Article number | 0205080177 |
| Composition, thickener | polyurea |
| Composition, type of oil | mineral oil |
| Colour space | blue |
| Texture | homogeneous , long fibrous |
| Service temperature, lower limit | -10 °C |
| Service temperature, upper limit | 180 °C |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 265 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 295 0.1 mm |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 240 °C |
| Speed factor (n x dm) | 200000 mm/min |
| Water resistance, DIN 51807-1, 3 h, 90°C | ≤ 1 – 90 rating |
Klüberlub PHB 71461, Klüberlub PHB71461
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Nicole C. –
Easy to use, without making a mess. Very effective; noticed a change after just one week. Looks even nicer in person.
Benoît –
Works without any issues. Everything OK. Very durable.
Ellie –
I noticed a difference after a short time! The quality pleasantly surprised me. Looks even nicer in real life. A friend recommended it; I’m very happy with the purchase.
Bianca T. –
Surprisingly good quality for the price. Easy to use, without making a mess. Packaging was slightly damaged, but the product is excellent. Packaging slightly damaged, but the product is excellent.
Elena –
Pleasant to use at home. Better than anything I’ve tried so far.
Élise –
Great product, worth every cent. Packaging was slightly damaged, but the product is excellent.
Luis B. –
Top product, top price. Simple to install. Arrived as promised.
Aurora –
Very effective; noticed a change after just one week.