Klüberfood NH1 14-222 Grease for food processing 400ml Spray can

Klüber Klüberfood NH1 14-222 Synthetic lubricating grease for universal application in the food- processing and pharmaceutical industries | N° 081280

• Klüberfood NH1 14-222 Spray was developed to meet the special requirements of the food-processing and pharmaceutical industries.
• Klüberfood NH1 14-222 Spray is a speciality grease based on a synthetic hydrocarbon oil and an aluminium complex soap.
• Klüberfood NH1 14-222 Spray is NSF H1 registered and was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
• The use of Klüberfood NH1 14-222 Spray can contribute to increase safety of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
• Temperature range: -25°C to +120°C 
• Volume: 400ml spray can

Benefits for your application

• Fully synthetic grease for long relubrication intervals
• Easy spray application
• Facilitates product streamlining owing to its wide range of applications
• Offers improved surface protection through good water resistance
• NSF H1-registered increasing process reliability

Application

• Klüberfood NH 1 14-222 Spray is used in machines, installations and equipment of the food-processing and pharmaceutical industries, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product.
• This lubricant is intended for the universal lubrication of lifting cylinders, joints, guide rods and rails, cams, etc.

Application notes

• Shake well before use and then spray. Ensure sufficient ventilation as explosive mixtures may form.
• Do not spray on naked flame, incandescent or hot objects. Please do not use spray in enclosed space, e.g. electrical cabinets.
• Observe additional application notes in the material safety data sheet and on the can label.
• Before applying Klüberfood NH1 14-222 Spray, the lubrication points should be thoroughly cleaned so as to ensure maximum hygiene, which is mandatory for H1 lubrication.

Technical specifications

Hazard Statements (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: may burst if heated.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-phrases)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P273: Avoid release to the environment.

Response:

• P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P331: Do NOT induce vomiting.

Storage:

• P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com