Description
Klüber Summit SH 68 Synthetic air compressor oils | N° 050006
- Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives.
- They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
- Pack sizes: canister 20 l
Benefits for your application
- Low maintenance and operating costs due to extended oil change intervals up to 10,000 operating hours in oilinjected screw-type compressors
- Easy compressor oil conversion due to neutral behaviour of oils towards seals
- Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
- Longer servie life of the oil filters, activated carbon filters and oil separators
- Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and
separator life - Reduction of energy costs due to more energy efficient operation
Applications
- Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours.
- Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils.
- They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected.
Application notes
- When selecting the oil viscosity for air compressors please observe the manufacturers’ instructions. When switching a used compressor to a Klüber Summit SH oil, drain old oil from whole circuit of compressor while still warm.
- We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH oil.
Technical specifications
| Appearance | clear |
| Density, DIN 51757, 20 °C | approx. 0.86 g/cm³ |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C |
approx. 68 mm²/s |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C |
approx. 9.8 mm²/s |
| Viscosity index, DIN ISO 2909 | >= 115 |
| Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus |
>= 240 °C |
| Pour point, DIN ISO 3016 | <= -36 °C |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
filippo88 –
Everything in order.
Brooklyn –
Feels nice to use at home. Been using it for 2 weeks and already see results! The quality pleasantly surprised me. Packaging was slightly damaged, but product is excellent.
pauline_88 –
Very effective, I noticed a change in just a week.
Gabriel –
Would buy again. Better quality than I expected. Punctual service. Exactly what I needed.
Helena –
This solved my problem completely! It completely solved my problem! Better than anything I’ve tried so far. Been using it for 2 weeks and already see results!
Sebastian –
Good fit and quality. Perfectly packaged. Delivery faster than expected. Very fast shipping.
maelys88 –
Very satisfied, better than I expected. Very fast delivery, thank you. Not too big, not too small, just right. Better than anything I’ve tried so far.
matteo_s –
Fast and courteous service.
Yann L. –
Really good value for money. Recommended.
ella.bloom –
Very effective, I noticed a change in just a week. Better than anything I’ve tried so far.