Description
Synthetic long-term grease
- Klüber ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations.
- The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media.
- The additives contained in ISOFLEX TOPAS NCA52 increase wear protection.
- Content: 1kg can
- Available in 40g tube, 400g cartridge, 1kg can, 25kg bucket
Benefits for your application
- Reduced maintenance due to long-term or lifetime lubrication
- Reliable operation and many years of practical experience
- Wide application range even with high loads
- Low starting and running torques particularly at low temperatures ensure high efficiency and energy savings
- Longer component life due to good wear protection
Application
- ISOFLEX TOPAS NCA 52 is used for high-speed rolling and plain bearings as well as for small gears subject to high loads. Due to the good compatibility with plastics the grease is suitable for plastic-plastic or metal-plastic material combinations. The low starting torque and the good wear protection make it an ideal grease for the long-term lubrication of linear motion guides and ball screws, e.g. in handling and automation technology.
- ISOFLEX TOPAS NCA 52 can also be used for many automobile applications, e.g. for the lifetime lubrication of seat rails. It is suitable for components which have to be lubricated prior to dip painting and the drying process at peak temperatures of 180 °C as the lubricant remains at the friction point and provides reliable lubrication even after short thermal treatment.
Product data
| Article number | 0041790037 |
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Chemical composition, thickener | special calcium soap |
| Lower service temperature | -50 °C / -58 °F |
| Upper service temperature | 130 °C / 266 °F |
| Colour space | beige |
| Density at 20 °C | approx. 0,89 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 265 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 295 x 0,1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 31 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 5,9 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 2 800 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 5 200 mPas |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Copper corrosion, DIN 51811, (lubricating grease), 24h/120 °C | 1 – 120 corrosion degree |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C | <= 1 400 mbar |
| Speed factor (n x dm) | approx. 1 000 000 mm/min |
| Drop point, DIN ISO 2176, IP 396 | >= 220 °C |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 36 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
aria.belle –
I noticed a difference after a short time! I’ve been using it for 2 weeks and I already see results! Feels nice to use at home.
Vincenzo –
Arrived on time and in excellent condition.
Manon M. –
Excellent product, worth every cent. Not too big, not too small, perfect. Surprisingly good quality for the price. Easy to use, without making a mess.
Nathan K. –
Very easy to set up.
jonas_sky –
Received quickly. Super practical. Recommended. Fast and courteous service.
marlene88 –
Super fast delivery, thank you. Packaging slightly damaged, but the product is excellent.
henry_sun –
Practical and useful. Arrived right away, excellent service. Feels sturdy.
Sébastien –
Practical and functional. Perfectly packaged.