Description
ISOFLEX TEL/3000 ALTEMP Sliding grease with emergency lubricating properties | N° 005060
- Operators of precision-engineering and textile industry applications often have different requirements than in other industries.
- Precision engineering often requires greases with low friction coefficients and starting torques that provide emergency lubrication. Good low-temperature characteristics are also a frequent requirement.
- Temperature range: -45°C to +60°C
- Volume: 25kg
Benefits for your application
- Synthetic product for low friction and starting torque
- Longer component lifetime with optimised wear protection
- Good corrosion protection preventing premature component failure
- Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life
Applications
- The special product properties of ISOFLEX TEL 3000 ALTEMP facilitate its use in precision engineering and the textile industry.
- Typical applications of ISOFLEX TEL 3000 ALTEMP include:
- Rolling and plain bearings used in precision engineering at normal and low temperatures
- Zig-zag winding guides in spool and twisting machines
- Yarn guide rails in spool and twisting machines
Application notes
- ISOFLEX TEL 3000 ALTEMP can be applied to the clean lubrication point by brush, spatula or similar application equipment. The friction point can be cleaned with commercially available cleaning agents if necessary.
Technical specifications
| Lower service temperature | -45 °C / -49 °F |
| Upper service temperature | 60 °C / 140 °F |
| Texture | homogeneous |
| Texture | short-fibred |
| Colour space | beige |
| Density at 20 °C | approx. 0.95 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 280 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 310 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 19 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 4.5 mm²/s |
Hazard Statements (CLP)
Signal word: Danger
Hazard Statements (H-statements)
- H411: Toxic to aquatic life with long-lasting effects.
Precautionary Statements (P-statements)
Prevention:
- P273: Avoid release to the environment.
Response:
- P391: Collect spillage.
Other Relevant Information
- This substance/mixture contains no components in concentrations of 0.1% or higher that are classified as persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
- Does not contain any components with endocrine-disrupting properties according to REACH Article 57(f) or relevant regulations.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
oceane_fr –
Pleasant to use at home. Better than anything I’ve tried before. Very satisfied, better than I expected.
gabriele_it –
Fast delivery, good workmanship. Everything’s great. Very happy with the purchase, works great.
Caleb –
Works flawlessly. Exactly what I was looking for. Great service and product. Everything in perfect condition.
Tristan –
Works perfectly. Very practical. Everything perfect, would buy again. Everything in order.
Elena U. –
Pleasant to use at home. Easy to use, no mess at all.