Description
Lubricating and assembly paste
- ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
- Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.
- Size: 30kg bucket
- Available in 80g tube, 600g cartridge, 750g can, 30kg bucket
Benefits for your application:
- Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product
- Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion
- High pressure absorption capacity enables constant clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks
Application:
- ALTEMP Q NB 50 can be used for the assembly of frictional connections, e.g. annular springs or split taper sleeves, and positive connections, e.g. bearing seats, profiled guides, etc.
- The product has proven particularly successful in the lubrication of clamping chucks. High precision and constant clamping forces are essential requirements in chucks. Any decrease of the clamping force may cause tools or workpieces to become loose.
- ALTEMP Q NB 50 improves the sliding behavior of moving chuck components, enables constant clamping forces and may therefore be used in all types of chucks, such as scroll, cam and spiral chucks. It prevents stick-slip and protects against triboand fretting corrosion in frictional or positive connections. Furthermore, ALTEMP Q NB 50 is resistant to water and media, e.g. against cooling lubricants.
Application notes:
- Clean and degrease the surfaces thoroughly. Then apply the paste in a thin, coherent layer by means of a brush or cloth that does not fray (do not rub in). ALTEMP Q NB 50-Spray can be used to facilitate application.
Product data:
| Article number | 005011 |
| Lower service temperature | -15 °C / 5 °F |
| Upper service temperature | 150 °C / 302 °F |
| Chemical composition | solid lubricant |
| Chemical composition, thickener | barium complex soap |
| Chemical composition, type of oil | mineral oil |
| Texture | almost homogeneous |
| Texture | fibrous |
| Color space | white |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 250 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 270 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 46 mm²/s |
| Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C | 1 – 100 corrosion degree |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water |
<= 1 corrosion degree |
| Four-ball tester, welding load, DIN 51350 pt. 04 | >= 4 000 N |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 7 000 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 13 000 mPas |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Hazard Information (CLP)
Signal word: Warning
Hazard Statements (H-phrases)
- H410: Very toxic to aquatic life with long-lasting effects.
Safety Precautions (P-phrases)
Prevention:
- P273: Avoid release to the environment.
Response:
- P391: Collect spillage.
Additional Information
- This substance/mixture contains no components in concentrations of 0.1% or higher that are classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
- This substance/mixture contains no components classified as endocrine-disrupting under REACH Article 57(f) or the delegated EU regulations.
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,
Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
francesca_s –
The quality pleasantly surprised me. Not too big, not too small, just right.
charlotte_fr –
Very effective, I noticed a change in just a week. I was skeptical, but now I’ll order it regularly. Better than anything else I’ve tried before. It completely solved my problem!
madison88 –
Looks even nicer in real life. Very satisfied, it’s even better than I expected. Not too big, not too small, just perfect. No unpleasant smell, which I really appreciate.
Caroline –
Better than anything I’ve tried before. No unpleasant smell, which I really appreciate.
Nicole –
I’ve been using it for 2 weeks and already see results! I’ve been using it for 2 weeks and I already see results! Packaging slightly damaged, but the product is excellent. No unpleasant smell, which I really appreciate.
Nicolas –
Easy to assemble.
Liam G. –
Arrived on time and in excellent condition.
simona_roma –
The quality pleasantly surprised me.
filippo88 –
Very practical.
Selina –
Great product, worth every cent. Surprisingly good quality for the price.
veronica88 –
Very effective; noticed a change after just one week. I noticed the difference right away! No unpleasant smell, which I really appreciate. Perfect for my needs; I’m very satisfied.
Ludovica –
Better than anything I’ve tried so far. Easy to use, without making a mess. Perfect for my needs; I’m very satisfied.
arthur_75 –
Fast delivery, good workmanship. Received quickly.