Epple 33 sealing compound 1000ml

• Tough-elastic film, so that even larger gap lengths can be bridged
• Used at rough machined and coarse surfaces or threads
• Also be applied as sealant to absorbing substrates
• Remarkably high temperature resistance of 320° C.
• Chemical resistance to: Ammonia vapours, petrol, butanol, anhydrous glycerin, anhydrous glycol, fuel oil, mineral oils, perchlorethylene, salt solutions, pure turpentine oil, fuel mixture, water, pure xylene.
• For sealing on roughly machined and rough surfaces or threads
• Application: Use in particular for sealing oven doors, in gear construction or on ventilation ducts

Application: It is used at rough machined and coarse surfaces or threads, e.g. for the sealing of wickets, in transmission manufacturing or at air-ducts. Thanks to its low viscosity, it can also be applied as sealant to absorbing substrates, as this provides slight consolidation of the surface at the same time.

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H225: Highly flammable liquid and vapor.
• H319: Causes serious eye irritation.

Safety Statements (P-phrases)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves.

Response:

• P370+P378: In case of fire: Use dry powder or sand for extinction.

Disposal:

• P501: Dispose of contents/container to an approved waste disposal facility.

Components determining labeling

• not applicable

Supplementary hazard features

• not applicable

E. EPPLE & CO. GMBH, Hertzstraße 8, 71083 Herrenberg, GERMANY, +49 7032 9771-0, [email protected], www.epple-chemie.de