Castrol Molub-Alloy 100-2 HT High temperature grease 1kg

MOLUB-ALLOY™ 100-2 HT (previously named Viscotemp™ 2) is a fully synthetic high temperature grease for lubrication points constantly exposed to extremely high temperatures. It ensures long-term lubrication of sliding and rolling bearings and other greasing points at high operating temperatures, elevated bearing pressures and aggressive ambient conditions.

Application

• For rolling and sliding bearings as well as grease-lubricated sliding surfaces in the high temperature range.
• For fan bearings in hot air streams.
• For calender bearings, baking plants and continuous-flow driers. In overhead conveyors of painting lines subjected to chemicals.
• For applications with exposure of hot and cold water as well as steam.
• Temperature application range: – 20°C/- 4°F to + 220°C/+ 428°F.

Advantages

• Extremely temperature-stable.
• Resistant to hot and cold water.
• Resistant to aggressive ambient influences.
• High protection against friction and wear.
• Excellent load bearing capacity.
• Reliable corrosion protection.
• Silicone-free

Technical specifications

• Color: White Yellowish
• Base Oil: PAO/ Ester
• Thickener: Organic Thickener
• Density @ 20°C / 68°F: 1060 kg/m³
• Base Oil Viscosity @ 40°C / 104°F: 120 mm²/s 
• Dropping Point  °C/°F: >300/>5720
• Worked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm: 265-295
• Volume: 1 kg can
• Also available as: 5 kg bucket
• GLIS number: 15C6A7
• MSDS code: 468586

Hazard Information (CLP)

Hazard pictogram(s): Exclamation mark
Signal word: Warning

Hazard statements (H-phrases)

• H317 – May cause an allergic skin reaction.
• H412 – Harmful to aquatic life with long lasting effects.

Prevention (P-phrases)

• P280 – Wear protective gloves.
• P273 – Avoid release to the environment.
• P261 – Avoid breathing dust.

Response

• P362 + P364 – Take off contaminated clothing and wash it before reuse.
• P302 + P352 – IF ON SKIN: Wash with plenty of soap and water.
• P333 + P313 – If skin irritation or rash occurs: Get medical attention.

Storage and Disposal

• Not applicable (storage).
• P501 – Dispose of contents and container in accordance with all local, regional, national and international regulations.

Additional Relevant Information

• UFI: H520-U00X-X00F-CVKV
• May cause skin defatting.
• Injection injuries under high pressure are a serious medical emergency (see section 4).

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com