Castrol Braycote Inertox 2 High-temperature grease 1kg tin

Castrol Braycote Inertox 2 High-temperature grease, NLGI grade 2

Castrol Braycote™ Inertox Range (previously called Castrol Interox™ Range) are chemically and thermally stable hightemperature greases on a fully synthetic basis. There are universally applied for long-term lubrication of rolling and sliding bearings especially when exposed to hostile ambient conditions. The range consists of Braycote Inertox 400-1( previously called Inertox Light), Braycote Inertox 500-2 (previously called Inertox Medium), Braycote Inertox 240-2 (previously called Inertox Medium 150) and Braycote Inertox 2 (previously called Inertox Heavy).

Application

• For rolling and sliding bearings with extremely extended relubrication intervals such as in:
  • Film stretching machines
  • Tenter frames for textiles
  • Oven carriages in the ceramics industry
• For high-temperature lubrication of rolling and sliding bearings.
• Under hostile ambient conditions.
• Pumpable in central lubrication systems.
• Temperature application range: -25°C to +260°C (at higher operating temperatures adequate ventilation must be ensured!)

Specifications / Approvals

• DIN 3536 and DIN EN 377 (DVGW)
• DIN EN 377 (DVGW)

Advantages

• Excellent thermal stability.
• High wear protection and good load carrying capacity.
• Good corrosion protection.
• Non-flammable.
• Inert
• Braycote Inertox 500-2 and Braycote Inertox 240-2 are approved for gas devices (DVGW)

Technical specifications

• Colour: White
• Base oil: PTFE / Synthetic Oil
• Density @ 20°C / 68°F kg/m³: 1930
• Worked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm: 265-295
• Base Oil Viscosity @ 40°C / 104°F mm²/s: 148.5
• Water Resistance: 0
• Volume: 1kg tin
• Also available in: 600g cartridge
• GLIS number: 15D754
• MSDS code:468578

Hazard Information (CLP)

Signal word: Danger.

Hazard Statements (H Codes)

• H318 – Causes serious eye damage.
• H315 – Causes skin irritation.

Precautionary Statements (P Codes)

Prevention:

• P280 – Wear protective gloves. Wear eye or face protection.
• P264 – Wash hands thoroughly after handling.

Response:

• P302 + P352 + P362+P364 – IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.
• P332 + P313 – If skin irritation occurs: Get medical attention.
• P305 + P351 + P338 + P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician.

Storage and Disposal

• Storage: Not applicable.
• Disposal: Not applicable.

Other Relevant Information

• High pressure applications: Injections through the skin require immediate medical attention. See “Notes to physician” in Section 4 of the Safety Data Sheet.

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com