Klüberplex GE 11-680 Adhesive gear lubricant 400g cartridge

Klüberplex GE 11-680 Adhesive gear lubricant

• Klüberplex GE 11-680 is an adhesive lubricant with a mineral oil base and an aluminium complex soap thickener.
• It is resistant to high pressure and contains anti-wear additives, corrosion and oxidation inhibitors.
• Klüberplex GE 11-680 is free of bitumen, solvents and raw materials containing lead.
• Temperature range: 0°C to +140°C 
• Volume: 400g cartridge
• Also available in: in 1 Kg can, and in STAR 60cm³ cartridge

Benefits for your application

• Adhesive lubricant
• Free of raw materials containing lead or solvents
• Resistant to high pressures
• FZG scuffing load stage > 12
• Anticorrosion properties
• Applicable through automatic lubrication systems

Applications

• Klüberplex GE 11-680 is designed for the lubrication of open and closed spur and bevel gears, lifting spindles, slideways and guideways, large chain drives and sliding bearings.
• It is particularly suitable for elevated component temperatures and wherever adhesive lubricants containing solid lubricants should not be used.

Application notes

• Klüberplex GE 11-680 should preferably be used for the lubrication of tooth flanks. It is applied to the gears through automatic spray systems. Smaller drives are also lubricated through positive drip-feed equipment, by brush or a hand spray equipment (e. g. with the Klübermatic LB spray gun). Splash lubrication is possible for components operating at low circumferential speeds (< 3 m/s).

Technical specifications

Klüberplex GE11-680, Klüberplex GE11680

Hazard Information (CLP)

Signal word: Warning.

Hazard statements (H-statements)

• H317 May cause an allergic skin reaction.

Precautionary statements (P-statements)

General:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P103 Read carefully and follow all instructions.

Prevention:

• P280 Wear protective gloves and protective clothing.
• P261 Avoid breathing mist / vapour / aerosol.
• P272 Contaminated work clothing should not be allowed out of the workplace.

Response:

• P302+P352 IF ON SKIN: Wash with plenty of water and soap.
• P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
• P362+P364 Take off contaminated clothing and wash it before reuse.

Disposal:

• P501 Dispose of contents/container to an approved hazardous waste disposal site in accordance with local regulations.

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com