Klüberplus S 01-004 Aqueous graphite suspension 15L

Klüberplus S 01-004 is a stable, aqueous graphite suspension used for applications at very high temperatures. It is free from solvents and thus prevents environmental contamination by solvent evaporation. In an undiluted condition Klüberplus S 01-004 is characterized by a very good wetting capacity, good corrosion protection and high stability.

Benefits for your application:

• Chain lubricant for extremely high temperatures
• Solvent-free
• Excellent wetting capacity
• High stability

Application:
Klüberplus S 01-004 is suitable for the lubrication of transport chains in burning and annealing furnaces (e.g. tube annealing furnaces) operating at extremely high temperatures. It is also suitable for drive and control chains in melting furnaces used in the metalworking industry and for other chains subject to high thermal loads, such as plate carrier chains in baking ovens.
Klüberplus S 01-004 can also be used as a release agent for the diecasting of copper alloy materials.

Application notes:
Klüberplus S 01-004 is a ready-to-use product that can be applied by brush, oil metering can or automatic spray equipment. For chain relubrication we recommend application to a cold chain or to a chain heated to approx. 60 °C. If required, dilution with water is possible. However, the lubricity, wettability, corrosion protection and stability of Klüberplus S 01-004 will decrease to the same extent as the dilution ratio increases. For chain lubrication we recommend dilution with 4 parts of water maximum. Other dilution ratios are possible depending on the specific application. It may then be necessary to install an agitator in the lubricant reservoir to prevent the solid lubricant particles from settling. The wetting capacity should also be checked.
Protect from frost and direct heat.

Product data:

Article number	042155
Upper service temperature	500 °C / 932 °F
Color space	black
Texture	homogeneous
Texture	very viscous
Determination of pH value, DIN 51369, electrometrically, undiluted	approx. 7.6
Runout time, DIN EN ISO 2431, with flow cups, 5 mm nozzle	approx. 45 s
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened  original container, approx.	12 months

 

---

Hazard Information (CLP)

Signal word: Warning.

Hazard Statements (H-phrases)

• H317 May cause an allergic skin reaction.
• H412 Harmful to aquatic life with long-lasting effects.

Precautionary Statements (P-phrases)

Prevention:

• P272 Contaminated work clothing should not be allowed out of the workplace.
• P273 Avoid release to the environment.
• P280 Wear protective gloves.

Response:

• P302 + P352 IF ON SKIN: Wash with plenty of water and soap.
• P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
• P362 + P364 Take off contaminated clothing and wash it before reuse.

Hazardous Components for Labeling

• Octhilinone (ISO)
• 1,2-Benzisothiazol-3(2H)-one
• 2-Methyl-2H-isothiazol-3-one

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com