Description
Klübertemp GR M07 N Long-term grease for a wide temperature range NLGI 1 | N° 090212
- Klübertemp GR M-N greases are white long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener.
- The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range.
- Klübertemp GR M-N greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materials
- Temperature range: -65°C to +180°C
- Volume: 1kg can
- Also available in: Bucket 10 kg
Benefits for your application
- Versatile use for components under particularly demanding conditions
- Over a wide service temperature range
- In contact with aggressive media
- Where sensitive plastic materials are used
Applications
- Klübertemp GR M07 N greases are preferably used for the lubrication of electromechanical actuators and small gears where they show low breakaway torques at low temperatures, exceptionally low friction values as well as a reduced tendency to stick-slip.
Application notes
- For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Then
blow the surfaces with clean, dry air or hot air to remove solvent residues. For initial lubrication, the friction points must be clean and
bright, i.e. free from oil, grease, perspiration and contamination. Klübertemp GR M …N greases may be applied directly or by means
of brush, spatula or lubricant dispenser.
Technical specifications
| Article number | 090212 |
| Chemical composition, type of oil | PFPE |
| Chemical composition, solid lubricant | PTFE |
| Lower service temperature | -65 °C |
| Upper service temperature | 180 °C |
| Density at 20 °C | approx. 1.91 g/cm³ |
| NLGI grade, DIN 51818 | 1 |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 310 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 340 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 40 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 11 mm²/s |
| Copper corrosion, DIN 51811, 24 h, 100°C | 1 – 100 – 24 corrosion degree |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Benedikt –
Everything perfect, thank you. Delivered earlier than expected.
Henry –
No reason to complain. Exactly what I needed. Everything perfect and fast.
Tobias T. –
Excellent-quality product.
elena_h –
Perfect for my needs; I couldn’t be happier. I’ve been using it for 2 weeks and I already see results! Better than anything else I’ve tried before.
Louis –
Fast and reliable.
cecilia_s –
This solved my problem completely! A friend recommended it to me and I’m thrilled with the purchase.
Ella S. –
The quality pleasantly surprised me. Really noticed a difference after using it! Looks even nicer in person. It completely solved my problem!