Description
Synthetic heavy-duty grease for long-term lubrication
- As a manufacturer or operator of modern installations operating at high temperature, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klübersynth HBE 94-401 we offer you a lubricating grease
based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical
loads providing excellent wear protection. Moreover, Klübersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used. Are
your components subject to strong oscillations? With its very good antiwear properties, Klübersynth HBE 94-401 meets this challenge too. - Size: 1kg can
- Available in 400g cartridge, 1kg can, 25kg bucket
Benefits
- Very good wear protection,
- Excellent corrosion protection
- Excellent water resistance
- Reduced maintenance costs due to extended relubrication intervals or lifetime lubrication, even at elevated temperatures due to synthetic grease technology
Application
- loaded rolling and plain bearings at high temperatures, e.g. in the steel industry.
This special lubricating grease meets the complex requirements of your for-life lubricated components, e.g. in
– support rollers in continuous casting installations
– conveyor roller bearings in continuous furnaces
– support roller bearings in pickling and tin plating
– plain bearings of forging presses - Due to its excellent wear resistance this lubricating grease can also be used for roller bearings in wood pellet presses.
Product data
| Article number | 4295 |
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Chemical composition, thickener | calcium complex soap |
| Lower service temperature | -35 °C / -31 °F |
| Upper service temperature | 160 °C / 320 °F |
| Colour space | brown |
| Texture | long-fibred |
| Texture | homogeneous |
| Density at 20 °C | approx. 0,93 g/cm³ |
| Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C | <= 1 400 mbar |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 290 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 320 x 0,1 mm |
| Speed factor (n x dm) | approx. 300 000 mm/min |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 4 000 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 8 000 mPas |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 400 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 40 mm²/s |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Oil separation, DIN 51817 N, after 7 d/40 °C | <= 3 % by weight |
| Drop point, DIN ISO 2176, IP 396 | >= 230 °C |
| Four-ball tester, welding load, DIN 51350 pt. 04 | >= 2 800 N |
| Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | 0 – 90 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 24 months |
Hazard information (CLP)
Signal word: Warning.
Hazard statements (H-phrases)
- H319: Causes serious eye irritation.
Precautionary statements (P-phrases)
Prevention:
- P264: Wash skin thoroughly after handling.
- P280: Wear eye protection / face protection.
Response:
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337 + P313: If eye irritation persists: Get medical advice / attention.
Additional labelling (EUH-phrases)
- EUH208: Contains Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts; Condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol. May produce an allergic reaction.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
tristan88 –
Everything perfect, thank you. Everything as described. Solid product, would buy again.
delphine_s –
Looks even nicer in person. A friend recommended it and I’m so glad I ordered. Not too big, not too small, perfect. Surprisingly good quality for the price.
Roberto F. –
No issues at all so far. Great purchase. Received in perfect condition. Super practical.
tim_88 –
Solid product, would buy again. Great value for money.
clement88 –
Very satisfied with the purchase. Easy to assemble.
Lina X. –
Looks even nicer in real life. Very satisfied, it’s even better than I expected.
giorgia_bella –
Really noticed a difference after using it!
james_88 –
Durable product. Great value for money.
Enrico H. –
Everything’s great. Fast and secure delivery. Really good value for money.
lena_sky –
Very satisfied, better than expected. Not too big, not too small, perfect. Surprisingly good quality for the price. The quality pleasantly surprised me.
Stéphane X. –
Fast and reliable. Very fast shipping. Perfect for what I needed.
emily_rose –
Perfect for my needs, couldn’t be happier. No unpleasant smell, which I really appreciate. Surprisingly good quality for the price.
louis75 –
Arrived without any defect. Excellent material. Top product, would definitely recommend. Everything as expected.
Pauline –
Surprisingly good quality for the price.