Description
ISOFLEX TEL/3000 ALTEMP Sliding grease with emergency lubricating properties | N° 005060
- Operators of precision-engineering and textile industry applications often have different requirements than in other industries.
- Precision engineering often requires greases with low friction coefficients and starting torques that provide emergency lubrication. Good low-temperature characteristics are also a frequent requirement.
- Temperature range: -45°C to +60°C
- Volume: 1 kg can
- Also available in: 25 kg bucket
Benefits for your application
- Synthetic product for low friction and starting torque
- Longer component lifetime with optimised wear protection
- Good corrosion protection preventing premature component failure
- Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life
Applications
- The special product properties of ISOFLEX TEL 3000 ALTEMP facilitate its use in precision engineering and the textile industry.
- Typical applications of ISOFLEX TEL 3000 ALTEMP include:
- Rolling and plain bearings used in precision engineering at normal and low temperatures
- Zig-zag winding guides in spool and twisting machines
- Yarn guide rails in spool and twisting machines
Application notes
- ISOFLEX TEL 3000 ALTEMP can be applied to the clean lubrication point by brush, spatula or similar application equipment. The friction point can be cleaned with commercially available cleaning agents if necessary.
Technical specifications
| Lower service temperature | -45 °C / -49 °F |
| Upper service temperature | 60 °C / 140 °F |
| Texture | homogeneous |
| Texture | short-fibred |
| Colour space | beige |
| Density at 20 °C | approx. 0.95 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 280 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 310 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 19 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 4.5 mm²/s |
Hazard Statements (CLP)
Signal word: Danger
Hazard Statements (H-statements)
- H411: Toxic to aquatic life with long-lasting effects.
Precautionary Statements (P-statements)
Prevention:
- P273: Avoid release to the environment.
Response:
- P391: Collect spillage.
Other Relevant Information
- This substance/mixture contains no components in concentrations of 0.1% or higher that are classified as persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
- Does not contain any components with endocrine-disrupting properties according to REACH Article 57(f) or relevant regulations.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
aurelie75 –
Super fast delivery, thank you. This solved my problem completely! I was skeptical, but now I order regularly. Packaging slightly damaged, but the product is excellent.
Elijah M. –
No complaints.
Charlotte –
Not too big, not too small, just right.
elijah_s –
Top seller. Great purchase, thank you. Very durable.
savannah89 –
Solved my problem completely! Very satisfied, it’s even better than I expected. Better than anything I’ve tried so far. I was skeptical, but now I’ll order it regularly.
paola89 –
This solved my problem completely! Feels nice to use at home.
Jakob B. –
Feels durable and well built. Arrived as promised. Everything was smooth and fast. Robust and well-made.
aria.belle –
Not too big, not too small, just right. Very satisfied, better than expected. Easy to use, without making a mess.
Ginevra T. –
Solved my problem completely!