Klübersynth UH1 64-62 Synthetic lubricating grease 25kg

Synthetic lubricating grease suitable for use in the food-processing and pharmaceutical industries.

• Klübersynth UH1 64-62 shows a good low- and hightemperature behaviour, and good resistance to water, corrosion, ageing and oxidation.
• Klübersynth UH1 64-62 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 64-62 can contribute to increase reliability of your production processes.
• We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
• Size: 25kg

Benefits for your application:

• Less maintenance due to good resistance to low and high temperatures, synthetic base oil for extended relubrication intervals and good resistance to water
• ISO 21469 certified – supports the compliance with the hygienic requirements in your production.

Application:
Klübersynth UH1 64-62 is suitable for lubrication points in machines and installations used in the food-processing and pharmaceutical industries, particularly for all points where contact between the lubricant and the food product cannot be excluded. We recommend lubricating all friction points with Klübersynth UH1 64-62 in order to avoid negative effects caused by lubricant spreading.

Application notes:
Klübersynth UH1 64-62 is applied by brush, spatula, grease gun or grease cartridge. Before using Klübersynth UH1 64-62 to replace other greases, the bearings should be cleaned thoroughly. Grease exchange by relubrication is sufficient if the greases are miscible.

Product data:

Article number	096046
NSF-H1 registration	136 871
Chemical composition, type of oil	ester oil
Chemical composition, type of oil	synthetic hydrocarbon oil
Chemical composition, thickener	silicate
Lower service temperature	-40 °C / -40 °F
Upper service temperature	140 °C / 284 °F
Color space	beige
Texture	homogeneous
Density at 20 °C	approx. 0.93 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 65 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 10 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer	approx. 3 000 mPas
Drop point, DIN ISO 2176, IP 396	>= 250 °C
Speed factor (n x dm)	approx. 500 000 mm/min
Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C	<= 1 400 mbar
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened  original container, approx.	24 months

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com