3M Scotch-Weld DP100 Two part epoxy structural adhesive 50ml

3M Scotch-Weld 2-component epoxy resin-based construction adhesive for the EPX System DP 100, transparent, 50 ml”

3M Scotch-Weld DP100 is a hard, 2-component, epoxy resin-based construction adhesive for the EPX system. The product with a very short processing time achieves high shear strength under static loads and is characterized by transparency, pourability and quick and easy processing. Scotch-Weld DP 100 is UL listed and was developed for bonding metals such as steel, aluminum, copper, brass and a variety of plastics such as PC, rigid PVC, GRP, ABS as well as other materials such as glass and ceramics.

Characteristics

• Processing time of 3 to 5 minutes
• Hard
• High shear strength
• Static load
• UL listed
• Mixing ratio 1:1
• Important: Mixing nozzle, feed piston and EPX hand processing device are not included with the adhesive. Please order these accessories separately.

Advantages

• Very short processing time
• Very suitable for potting

Product benefits

• The first load on the joined parts is possible after a very short time

Area of application

• Bonding of metals, plastics such as ABS, GRP, PC etc. as well as glass and ceramics

Technical specifications

General Properties	Part B	Part A
Color	Black	Off-white
Base	Modified epoxy	Modified amine
Consistency	Thixotropic paste	Thixotropic paste
Density	1.04 g / cm³	1.03 g / cm³
Viscosity	250 Pas	75 Pas
Mix ratio by weight (by volume)	100 : 50 wt. (100 : 50 vol.)	100 : 50 wt. (100 : 50 vol.)
Work life and open time at 23 ± 2 °C	> 120 minutes	> 120 minutes
Handling strength	4 hours	4 hours
Full cure cycle	7 days at room temperature	7 days at room temperature

---

Hazard Information (CLP)

Signal word: Danger (Part A), Warning (Part B)

Hazard Statements (H-phrases)

• H314: Causes severe skin burns and eye damage. (Part A)
• H317: May cause an allergic skin reaction. (Part A, Part B)
• H412: Harmful to aquatic life with long-lasting effects. (Part A)
• H315: Causes skin irritation. (Part B)
• H319: Causes serious eye irritation. (Part B)
• H411: Toxic to aquatic life with long-lasting effects. (Part B)

Safety Precautions (P-phrases)

Prevention:

• P260A: Do not breathe vapours. (Part A)
• P280D: Wear protective gloves/protective clothing/eye protection/face protection. (Part A)
• P273: Avoid release to the environment. (Part B)
• P280E: Wear protective gloves. (Part B)

Response:

• P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. (Part A)
• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (Part A, Part B)
• P310: Immediately call a POISON CENTER/doctor. (Part A)
• P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. (Part A, Part B)

Disposal:

• P501: Dispose of contents/container in accordance with local/regional/national regulations. (Part B)

Other Hazards

• No other known hazards. (Part A, Part B)
• This material does not contain substances considered PBT or vPvB. (Part A, Part B)

Information on product safety (Manufacturer, Contact)

3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, [email protected], www.3m.com/msds