Description
TEROSON® MS 930 is a solvent-free, sprayable 1K adhesive and sealant based on silane-modified polymers (SMP) for elastic sealing and structural bonding in vehicle, container and equipment construction. UV- and weather-resistant with broad substrate adhesion – suitable for interior and exterior use.
- Packaging: 310 ml cartridge
- Colors: white (IDH No. 2496647), grey (IDH No. 2496651), black (IDH No. 2496652)
- Also available in: 310 ml foil pack, 570 ml foil pack
Applications
- Seam and joint sealing in automotive, vehicle and container construction
- Marine applications, HVAC, electrical equipment
- Bonding of flooring and reinforcement elements (e.g. around windshields)
- Adheres to metals, glass, plastics, ceramics – primerless application
Features
- Free from solvents, isocyanates, silicones and PVC
- Elastic, thixotropic, paste-like – suitable for vertical applications
- UV and QUV resistant according to internal tests
- Water vapor resistance according to IEC 61215/61646 (1,000 h at 85 °C / 85 % RH)
- Temperature resistant: -50 °C to +80 °C (short-term up to 120 °C)
- Application: manual, pneumatic or from drums/hobbocks (requires ram pump)
Technical Data
| Chemical base | Silane-modified polymer (MS polymer) |
| Odor | Characteristic |
| Consistency | Thixotropic, paste-like |
| Density | approx. 1.5 g/cm³ |
| Skin-over time (23 °C, 50 % RH) | 10-40 min |
| Curing rate | approx. 4 mm / 24 h |
| Shore A hardness | 30 |
| Tensile strength (ISO 37) | approx. 0.9 MPa |
| Elongation at break | approx. 250 % |
| Volume shrinkage | < 2 % |
| Temperature resistance | -50 °C to +80 °C (short-term up to 120 °C) |
| Shelf life | 12 months at 10-25 °C (frost-free) |
Application Notes
- Apply using manual, pneumatic or electric guns (e.g. cartridge gun)
- Use appropriate nozzles: standard nozzle or V-cut nozzle
- Clean bonding surfaces with Teroson VR 30, VR 10 or TEROSON SB 450
- Ensure material is at room temperature to avoid increased viscosity
- Warning: Do not use on stress-crack-sensitive PMMA/PC (e.g. Plexiglas®, Makrolon®) without pretesting
- Smooth before skin formation with Sika® Smoothing Agent N
- Cured material can only be removed mechanically
Paintability
- Paintable after skin formation with 1K PUR or 2K acrylic paints
- Bake coating only after full curing
- Pretesting recommended to prevent cracking in the paint layer
Chemical Resistance
- Resistant to fresh and salt water, diluted acids and alkalis
- Short-term resistance to fuels, oils and greases
- Not resistant to organic solvents, concentrated acids or alkalis
Teroson MS 930, MS polymer, sealant, UV resistant, sprayable adhesive, isocyanate-free, automotive bonding
Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com
paula88 –
Packaging slightly damaged, but the product is excellent.
layla_moon –
I noticed a difference after a short time!
Elias –
Arrived without any defect. Price matches the quality. Very good build quality.
remi_fr –
Everything perfect and fast. Excellent packaging. Arrived right away, excellent service. No reason to complain.
laura_ma –
Looks even nicer in person. Very satisfied, better than expected. No unpleasant smell, which I really appreciate.
ellie.love –
Not too big, not too small, just right.
sophie.ma –
Very satisfied, better than expected. Better than anything I’ve tried so far. Looks even nicer in person. Not too big, not too small, just perfect.
Selina C. –
I’ve been using it for 2 weeks and I already see results! Looks even nicer in real life. Very satisfied, it’s even better than I expected.
Savannah G. –
No unpleasant smell, which I really appreciate.