• LOCTITE® Epoxy Quick Set is a fast-curing, two-part epoxy adhesive designed for strong, transparent bonding of metal, wood, ceramics, glass, and rigid plastics, with a set time of just 5 minutes.
  1. Home
  2. JosS Product Catalogue
  3. LOCTITE
  4. Specialty Glues & Epoxies
  5. Loctite Epoxy Quick Set

Loctite Epoxy Quick Set

LOCTITE® Epoxy Quick Set is a fast-curing, two-part epoxy adhesive designed for strong, transparent bonding of metal, wood, ceramics, glass, and rigid plastics, with a set time of just 5 minutes.

Category:

Loctite Epoxy Quick Set

Fast-setting epoxy adhesive for general-purpose bonding

  • Sets in 5 minutes for rapid assembly and repairs

  • Creates high-strength, impact-resistant bonds on multiple substrates

  • Bonds metal, wood, ceramic, glass, concrete, and rigid plastics

  • Clear finish suitable for visible joints and decorative applications

  • Gap-filling properties for uneven surfaces

  • Can be sanded, drilled, and painted after full cure

  • Resistant to water, solvents, and household chemicals

  • Available in dual-syringe packaging with a 1:1 mix ratio



Application:

LOCTITE® Epoxy Quick Set is a versatile, fast-setting two-component adhesive that forms durable, transparent bonds in just 5 minutes. It is ideal for quick household and industrial repairs on a wide range of materials.

Performance Features & Benefits:

  • Rapid Setting: Reaches handling strength within 5 minutes of application.
  • Clear Finish: Creates invisible bonds, ideal for visible or decorative repairs.
  • High Strength & Durability: Resists impact, vibration, and water.
  • Gap Filling: Works well on uneven or slightly irregular surfaces.
  • Broad Substrate Compatibility: Bonds metal, glass, ceramic, wood, concrete, and rigid plastics.
  • Post-Cure Workability: Can be sanded, painted, or drilled after curing.

Main Application Areas:

  • Quick household and DIY repairs
  • Automotive and appliance bonding
  • Decorative and craft applications requiring clear, strong bonds

Specifications & Approvals:

  • Mix Ratio: 1:1 (resin to hardener)
  • Meets ASTM D638 for tensile strength
  • VOC-compliant formulation

Environmental & Safety Information:

  • Apply in a ventilated area and avoid contact with uncured resin or hardener.
  • Remove uncured adhesive with acetone or isopropyl alcohol.
  • Safety Data Sheet (SDS) available via inquiry

Technical Specifications:

Property Typical Value Test Method
Base Epoxy resin and hardener —
Appearance Clear —
Mix Ratio (Resin:Hardener) 1:1 by volume —
Working Time 5 minutes —
Full Cure 24 hours —
Tensile Strength 3000 psi (20.7 MPa) ASTM D638
Service Temperature Range -20°F to 200°F (-29°C to 93°C) —
Gap Fill Up to 0.125 in (3.2 mm) —
VOC Content < 5% EPA Method 24

    You are inquiring about: