Loctite Epoxy Putty
LOCTITE® Epoxy Putty is a versatile, hand-mixable two-part epoxy putty that bonds, fills, and repairs metal, wood, concrete, ceramic, and many plastics, curing to a hard, durable finish.
Loctite Epoxy Putty
Moldable epoxy putty for structural bonding and repair
-
Hand-kneadable putty that mixes easily for quick application
-
Bonds to metal, wood, ceramic, concrete, fiberglass, and many plastics
-
Fills holes, cracks, and voids, and can rebuild or reshape components
-
Water-resistant, impact-resistant, and chemical-resistant once cured
-
Sets in 5–10 minutes and fully cures in 60 minutes
-
Can be drilled, sanded, filed, or painted after curing
-
Suitable for indoor and outdoor applications, including plumbing repairs
Application:
LOCTITE® Epoxy Putty is a moldable, hand-mixable two-component epoxy designed for bonding, sealing, and rebuilding a wide variety of surfaces. It is ideal for quick repairs where conventional adhesives are impractical.
Performance Features & Benefits:
- Fast-Setting: Sets in 5–10 minutes and cures in approximately 60 minutes.
- Moldable & Gap-Filling: Easily fills holes, cracks, and gaps while allowing component reshaping.
- Durable Bond: Provides water resistance, impact resistance, and chemical resistance.
- Workable Finish: Once cured, can be drilled, sanded, filed, and painted.
- Multi-Surface Compatibility: Bonds metal, wood, ceramic, concrete, fiberglass, and many plastics.
Main Application Areas:
- Plumbing and pipe repairs
- Fixing holes and cracks in metal or concrete
- Rebuilding or reshaping components
Specifications & Approvals:
- Mix Ratio: Pre-proportioned (1:1 resin and hardener within the putty)
- Complies with ASTM D638 for tensile strength
- VOC-free formulation
Environmental & Safety Information:
- Wear gloves when kneading and applying; avoid prolonged skin contact.
- Clean tools and surfaces before the putty sets.
- Safety Data Sheet (SDS) available via inquiry
Technical Specifications:
| Property | Typical Value | Test Method |
|---|---|---|
| Base | Epoxy resin and hardener (putty form) | — |
| Appearance | Gray after mixing | — |
| Working Time | 3–5 minutes | — |
| Set Time | 5–10 minutes | — |
| Full Cure | 60 minutes | — |
| Tensile Strength | 900 psi (6.2 MPa) | ASTM D638 |
| Compressive Strength | 1800 psi (12.4 MPa) | ASTM D695 |
| Service Temperature Range | -20°F to 200°F (-29°C to 93°C) | — |
| Water Resistance | Yes (after cure) | — |
| VOC Content | 0% | — |
About Us
Providing industrial and metalworking solutions since 1991.