Loctite Epoxy Marine
LOCTITE® Epoxy Marine is a two-part, waterproof epoxy adhesive formulated for high-strength bonding, filling, and repairs in marine and underwater environments.
Loctite Epoxy Marine
Marine-grade epoxy adhesive for underwater and wet-environment applications
-
Creates strong, permanent bonds on fiberglass, metal, wood, glass, and rigid plastics
-
Fully waterproof and suitable for continuous water exposure
-
Gap-filling adhesive for structural repairs and sealing
-
Resistant to saltwater, impact, and most chemicals
-
Sets in 50 minutes with full cure in 24 hours
-
Can be sanded, drilled, and painted after curing
-
Ideal for boat repairs, marine hardware, and wet-environment assemblies
Application:
LOCTITE® Epoxy Marine is a professional-grade, waterproof two-component epoxy designed for bonding and repairing surfaces exposed to water. It is ideal for marine hardware, boat repairs, and wet-environment applications requiring durable, structural strength.
Performance Features & Benefits:
- Waterproof & Marine-Grade: Withstands continuous water exposure, including saltwater.
- High Strength: Provides permanent, structural bonds on a variety of materials.
- Gap Filling: Ideal for sealing and repairing uneven or porous surfaces.
- Chemical & Impact Resistant: Stands up to harsh marine conditions.
- Workable Finish: Once cured, it can be sanded, drilled, and painted.
Main Application Areas:
- Boat hull and deck repairs
- Bonding marine hardware and fittings
- Underwater repairs and wet-environment sealing
Specifications & Approvals:
- Mix Ratio: 1:1 (resin to hardener)
- Waterproof and chemical-resistant formulation
- VOC-compliant
Environmental & Safety Information:
- Apply in well-ventilated areas and avoid skin contact with uncured resin or hardener.
- Clean uncured product with acetone or isopropyl alcohol.
- Safety Data Sheet (SDS) available via inquiry
Technical Specifications:
| Property | Typical Value | Test Method |
|---|---|---|
| Base | Epoxy resin and hardener | — |
| Appearance | Off-white | — |
| Mix Ratio (Resin:Hardener) | 1:1 by volume | — |
| Working Time | 50 minutes | — |
| Full Cure | 24 hours | — |
| Tensile Strength | 3200 psi (22 MPa) | ASTM D638 |
| Service Temperature Range | -20°F to 200°F (-29°C to 93°C) | — |
| Gap Fill | Up to 0.125 in (3.2 mm) | — |
| Water Resistance | Fully waterproof after cure | — |
| VOC Content | < 5% | EPA Method 24 |
About Us
Providing industrial and metalworking solutions since 1991.