• LOCTITE® Clear Epoxy is a two-part, fast-setting adhesive that provides strong, crystal-clear bonds for a wide variety of materials including metal, glass, ceramic, wood, and rigid plastics.
  1. Home
  2. JosS Product Catalogue
  3. LOCTITE
  4. Specialty Glues & Epoxies
  5. Loctite Clear Epoxy

Loctite Clear Epoxy

LOCTITE® Clear Epoxy is a two-part, fast-setting adhesive that provides strong, crystal-clear bonds for a wide variety of materials including metal, glass, ceramic, wood, and rigid plastics.

Category:

Loctite Clear Epoxy

Versatile two-component epoxy adhesive for permanent, transparent bonding

  • Crystal-clear finish suitable for visible repairs and decorative applications

  • Bonds metal, glass, ceramic, wood, concrete, rigid plastics, and more

  • Sets in 5 minutes with handling strength achieved quickly

  • Water-resistant and impact-resistant once cured

  • Gap-filling capability for uneven surfaces

  • Can be sanded, drilled, and painted after curing

  • Resistant to common solvents and household chemicals

  • Available in dual-syringe packaging for precise 1:1 mixing



Application:

LOCTITE® Clear Epoxy is a fast-setting, two-part adhesive that creates strong, transparent bonds on a wide range of materials. It is ideal for household, automotive, and craft applications requiring a clear and durable finish.

Performance Features & Benefits:

  • Fast Setting: Achieves handling strength in approximately 5 minutes.
  • Crystal Clear Finish: Leaves an invisible bond, perfect for visible or decorative applications.
  • High Strength & Durability: Provides impact resistance and long-lasting performance.
  • Gap Filling: Effective on uneven or slightly irregular surfaces.
  • Versatile Bonding: Bonds metal, wood, glass, ceramic, concrete, and rigid plastics.
  • Paintable & Sandable: Once cured, surfaces can be finished as needed.
  • Chemical Resistance: Resists solvents and household cleaners.

Main Application Areas:

  • Household and DIY repairs
  • Automotive and appliance bonding
  • Crafts and decorative projects requiring clear finishes

Specifications & Approvals:

  • Mix Ratio: 1:1 (resin to hardener)
  • Complies with ASTM D638 (tensile strength testing)
  • VOC-compliant

Environmental & Safety Information:

  • Use in a well-ventilated area; avoid skin contact with uncured resin and hardener.
  • Clean excess adhesive immediately with acetone or isopropyl alcohol.
  • Safety Data Sheet (SDS) available via inquiry

Technical Specifications:

Property Typical Value Test Method
Base Epoxy resin and hardener —
Appearance Crystal clear —
Mix Ratio (Resin:Hardener) 1:1 by volume —
Working Time 5 minutes —
Handling Time 10–15 minutes —
Full Cure 24 hours —
Tensile Strength 3200 psi (22 MPa) ASTM D638
Service Temperature Range -20°F to 200°F (-29°C to 93°C) —
Gap Fill Up to 0.125 in (3.2 mm) —
VOC Content < 5% EPA Method 24

    You are inquiring about: