Shell Morlina S2 B 100 is a high-performance industrial bearing and circulating oil formulated to deliver reliable wear protection, excellent oxidation resistance, and efficient water separation in non-EP demanding systems.
  1. Home
  2. JosS Product Catalogue
  3. SHELL LUBRICANTS
  4. Industrial
  5. Bearing & Circulating Oils
  6. Shell Morlina S2 B 100

Shell Morlina S2 B 100

Old product name: Shell Morlina Oils

Shell Morlina S2 B 100 is a high-performance industrial bearing and circulating oil formulated to deliver reliable wear protection, excellent oxidation resistance, and efficient water separation in non-EP demanding systems.

Category:

Shell Morlina S2 B 100

( Previously named: Shell Morlina Oils )

High-performance oil for circulating systems and industrial bearings

  • Optimized for systems not requiring extreme pressure (EP) additives

  • Excellent oxidation resistance for long oil life

  • Enhanced water separation to maintain protective oil films

  • Good air release properties to prevent cavitation damage

  • Helps prevent corrosion and emulsion formation

  • Compatible with standard mineral oil seals and paints

  • Recommended for roll-neck bearings, enclosed gear systems (non-EP), and reciprocating gas compressors

Global Product Code: 001D7809



Application:

Shell Morlina S2 B 100 is a premium quality circulating and bearing oil designed for industrial systems where EP performance is not required. Its robust formulation provides superior protection against oxidation, wear, and corrosion while maintaining optimal system cleanliness and efficiency.

Performance Features & Benefits:

  • Long Oil Life: Formulated with a proven rust and oxidation inhibitor system for extended maintenance intervals.
  • Water Separation: Maintains oil film integrity in high-moisture environments, reducing wear.
  • Air Release: Minimizes cavitation and damage to pumps in circulation systems.
  • Corrosion Protection: Helps prevent rust and sludge, even in the presence of water.
  • High System Efficiency: Blended with high-quality base oils for optimal lubrication and low foaming.

Main Application Areas:

  • Machine circulation systems
  • Plain and rolling element bearings
  • Roll-neck bearings
  • Enclosed industrial gears (low or moderate load)
  • Cylinder lubrication for reciprocating gas compressors

Specifications & Approvals:

  • Danieli Standard 6.124249.F
  • DIN 51517-1 C
  • DIN 51517-2 CL
  • Morgan MORGOIL® Lubricant Specification New Oil (Rev. 1.1)

Environmental & Safety Information:

  • Avoid prolonged skin contact; use gloves and wash with soap after use.
  • Do not discharge into drains, soil, or water.
  • Dispose of used oil at authorized collection points.
  • Safety Data Sheet (SDS) available via inquiry

Technical Specifications:

Property Typical Value Test Method
ISO Viscosity Grade 100 ISO 3448
Kinematic Viscosity @ 40 °C 100 mm²/s ASTM D445
Kinematic Viscosity @ 100 °C 11.2 mm²/s ASTM D445
Viscosity Index 97 ISO 2909
Density @ 15 °C 881 kg/m³ ISO 12185
Flash Point (COC) 250 °C ISO 2592
Pour Point -15 °C ISO 3016
Rust Protection (Distilled Water) Pass ASTM D665A
Emulsion Test @ 82 °C 10 min ASTM D1401
TOST Oxidation Test >1400 hrs ASTM D943
RPVOT >200 min ASTM D2272
Foam Test Seq II (0/10 min) 10/0 ml ASTM D892

    You are inquiring about: