Shell Morlina S1 B 150 is a mineral-based industrial bearing and circulating oil designed to deliver reliable protection, excellent demulsification, and efficient lubrication in systems where water separation is critical.
  1. Home
  2. JosS Product Catalogue
  3. SHELL LUBRICANTS
  4. Industrial
  5. Bearing & Circulating Oils
  6. Shell Morlina S1 B 150

Shell Morlina S1 B 150

Old product name: Shell Vitrea M

Shell Morlina S1 B 150 is a mineral-based industrial bearing and circulating oil designed to deliver reliable protection, excellent demulsification, and efficient lubrication in systems where water separation is critical.

Category:

Shell Morlina S1 B 150

( Previously named: Shell Vitrea M )

High-performance circulating and bearing oil for industrial use

  • Designed for plain and rolling element bearings in general machinery

  • Excellent water separation characteristics support reliable lubrication under wet conditions

  • Good air release minimizes pump cavitation and wear

  • Corrosion protection even in the presence of water

  • Refined mineral base oils ensure stable performance over time

  • Meets Morgan MORGOIL® New Oil Rev. 1.1 Specification

  • Compliant with DIN 51517-1 – Type C

  • Previous product name: Shell Vitrea M

Global Product Code: 001D7801



Application:

Shell Morlina S1 B 150 is intended for use in industrial circulation and bearing lubrication systems where consistent protection, water separation, and system efficiency are required. It is especially suitable for plain and rolling element bearings, roll-neck bearings, and low to moderately loaded enclosed gears not requiring EP additives.

Performance Features & Benefits:

  • Prolonged Equipment Life: Helps extend bearing and system life through reliable wear and corrosion protection.
  • Water Separation: Efficient demulsification ensures oil film integrity in wet environments.
  • Air Release: Minimizes cavitation damage in circulating pumps.
  • Consistent Lubrication: High-quality mineral base oils support stable and efficient system operation.
  • Legacy Compatibility: Previously marketed as Shell Vitrea M.

Main Application Areas:

  • Machine circulation systems
  • Plain and rolling element bearings
  • Roll-neck bearings
  • Low or moderately loaded enclosed industrial gears (non-EP)

Specifications & Approvals:

  • Morgan MORGOIL® Lubricant Specification (New Oil Rev. 1.1)
  • DIN 51517-1 – Type C

Environmental & Safety Information:

  • Do not discharge into drains, soil, or water
  • Dispose of used oil at approved collection points
  • Refer to SDS for full safety instructions
  • Safety Data Sheet (SDS) available via inquiry

Technical Specifications:

Property Typical Value Method
ISO Viscosity Grade 150 ISO 3448
Kinematic Viscosity @ 40°C 150 mm²/s ASTM D445
Kinematic Viscosity @ 100°C 14.8 mm²/s ASTM D445
Viscosity Index 95 ISO 2909
Density @ 15°C 882 kg/m³ ISO 12185
Flash Point (COC) 225°C ISO 2592
Pour Point -6°C ISO 3016
Rust Test (Distilled Water) Pass ASTM D665A
Emulsion Test @ 82°C 20 minutes ASTM D1401

    You are inquiring about: