AeroShell Oil W 80 Plus is an SAE 40 mineral ashless dispersant aircraft engine oil enhanced with anti-wear and anti-corrosion additives, offering pilots single-grade performance with extended engine protection.
  1. Home
  2. JosS Product Catalogue
  3. SHELL LUBRICANTS
  4. Aviation
  5. Engine Oils - Piston
  6. Shell AeroShell Oil W80 Plus

Shell AeroShell Oil W80 Plus

AeroShell Oil W 80 Plus is an SAE 40 mineral ashless dispersant aircraft engine oil enhanced with anti-wear and anti-corrosion additives, offering pilots single-grade performance with extended engine protection.

Category:

Shell AeroShell Oil W80 Plus

Enhanced single-grade mineral ashless dispersant oil for certified aircraft piston engines

  • Combines AeroShell W80 base with additives from AeroShell W15W-50

  • Blended with high viscosity mineral base oils for thermal stability

  • Contains AeroShell’s established W Oils ashless dispersant additive system

  • Includes anti-wear additive equivalent to Lycoming LW 16702

  • Enhanced anti-corrosion properties protect idle engines from rust

  • Helps maintain camshaft and lifter surfaces, reducing premature wear

  • Designed to help engines reach full Time Between Overhaul (TBO)

  • Fully compatible with other approved aircraft piston engine oils

Global Product Code: 001B3353



Application:

AeroShell Oil W 80 Plus is a single-grade SAE 40 mineral oil formulated for use in certified aircraft piston engines. It builds upon the performance of AeroShell Oil W80 by incorporating advanced anti-wear and anti-corrosion additives, making it ideal for operators who prefer single-grade oils but require added engine protection.

Performance Features & Benefits:

  • Enhanced Engine Protection: Includes corrosion inhibitors and wear-reducing additives to safeguard components during storage and operation.
  • Built-In LW 16702 Equivalent: Contains anti-wear additive in proper proportion to meet FAA AD 80-04-03 compliance without separate treatment.
  • Dispersant Cleanliness: Formulated with AeroShell’s W Oils ashless dispersant package to prevent sludge and deposits.
  • Full Compatibility: Can be mixed with other approved aviation piston engine oils without issue.

Main Application Areas:

  • Certified four-stroke aircraft piston engines
  • Engines requiring SAE 40 grade oil with added wear and rust protection
  • Teledyne Continental and Textron Lycoming engines
  • Aircraft subject to extended idle periods or environmental exposure

Specifications & Approvals:

  • SAE J-1899 SAE Grade 40
  • FAA: Airworthiness Directive 80-04-03 R2 (compliant with built-in LW 16702)
  • Textron Lycoming: 301F; Service Bulletins 446E and 471B; Service Instruction 1409C
  • Continental Motors: SIL 99-2

Environmental & Safety Information:

  • This product presents minimal health hazards when handled as recommended.
  • Wear protective gloves when dealing with used oil. Wash skin thoroughly after contact.
  • Dispose of used oil at a licensed collection point. Do not discharge into the environment.
  • Safety Data Sheet (SDS) available via inquiry

Technical Specifications:

Property Typical Value Method
Colour < 3.0 ASTM D1500
Density @ 15°C 0.883 kg/l ASTM D1298
Kinematic Viscosity @ 40°C 113 mm²/s ASTM D445
Kinematic Viscosity @ 100°C 14.0 mm²/s ASTM D445
Viscosity Index 124 ASTM D2270
Pour Point -30°C ASTM D97
Flash Point 260°C ASTM D92 (Cleveland Open Cup)
Total Acidity 0.02 mgKOH/g ASTM D664
Sulphur Content 0.40% ASTM D129
Copper Corrosion (3h @ 100°C) 1A ASTM D130
Ash Content 0.001% ASTM D482

    You are inquiring about: