1. Home
  2. JosS Product Catalogue
  3. PELOX
  4. Cleaning & Care
  5. Cleaning Products
  6. CLEANING ELECTROLYTE P 50

CLEANING ELECTROLYTE P 50

Highly effective electrolyte cleaner for the electrochemical treatment of stainless steel weld seams and heat-affected zones, preserving surface structure while delivering immediate results.

Category:

CLEANING ELECTROLYTE P 50

Electrolyte cleaner for electrochemical pickling of weld seams and their heat-affected zones on stainless steel surfaces.

  • Effectively removes contamination, oxidation, and discoloration from stainless steel welds

  • No reaction time required — results are immediately visible

  • Preserves the original surface structure of the material

  • Suitable for all common Cr-Ni stainless steels

  • Can be used with all standard electrochemical pickling devices

  • Approx. yield: 1–3 m² per liter

  • Requires neutral rinsing with clean water after use

  • Recommended accessories: electrochemical pickling device, carbon brush, personal protective equipment

  • Storage/processing temperature: 5–25°C

  • Follow all safety and disposal instructions



Application

PELOX Cleaning Electrolyte P 50 is an advanced cleaner for electrochemical pickling of weld seams and heat-affected zones on stainless steel surfaces.

Properties

  • No reaction time required — immediate results
  • Removes discoloration, oxidation, and contaminants
  • Preserves the original surface structure
  • Compatible with all standard electrochemical pickling devices
  • Yields approx. 1–3 m² per liter

Usage Instructions

  • Always pre-test product suitability
  • Remove grease and oil residues beforehand using PELOX FR-D or AR 90
  • Apply using suitable accessories (available from PELOX)
  • Rinse surface thoroughly with clean water after treatment until pH neutral
  • Use according to the equipment manufacturer’s instructions
  • Avoid direct sunlight and high temperatures (recommended: 5–25 °C)
  • Wear appropriate PPE and follow safety data sheet
  • Ensure proper wastewater disposal and residue handling

Materials

All standard chrome-nickel stainless steels

Results

Produces a clean, metallic, evenly brightened surface

Comparison Table

Feature Specification
Reaction Time None (immediate effect)
Yield Approx. 1–3 m² per liter
Application Method Electrochemical (e.g., carbon brush)
Safety Corrosive (H290, H302, H314) – wear full PPE
Surface Compatibility Chrome-nickel stainless steels

    You are inquiring about: