1. Home
  2. JosS Product Catalogue
  3. PELOX
  4. Cleaning & Care
  5. Surface Cleaners
  6. SURFACE CLEANER P-AL

SURFACE CLEANER P-AL

Highly effective, odorless surface cleaner for aluminum, formulated to remove oxides, discoloration, and surface contaminants without affecting coating adhesion.

Category:

SURFACE CLEANER P-AL

Surface Cleaner for Aluminum and Related Alloys
Designed for pre-treatment cleaning of aluminum surfaces prior to coating or painting.

  • Effectively removes oxides, discoloration, and surface contaminants

  • Odorless, acid-based formulation for use on aluminum

  • Prepares surfaces for subsequent coating or painting based on surface roughness

  • Application by spraying or immersion

  • Minimum reaction time: 5 to 20 minutes (depending on temperature and surface condition)

  • Produces an evenly brightened aluminum surface

  • Yield: approx. 6–8 m²/kg in spray application

  • Requires pre-cleaning with an alkaline degreaser (e.g. PELOX AR)

  • Rinse thoroughly with clean water using a high-pressure washer (min. 150 bar)

  • Recommended working temperature: 5–25 °C

  • Use of personal protective equipment (PPE) is mandatory

  • Avoid direct sunlight and high temperatures during use

  • Suitable for aluminum surfaces and other non-ferrous metals (e.g. copper alloys)



Application

PELOX Surface Cleaner P-AL is a high-performance, odorless cleaning solution designed for aluminum surfaces. It effectively removes oxides, discoloration, and surface impurities to ensure optimal adhesion for coatings or paint.

Properties

  • Removes oxides, discoloration, and contamination from aluminum surfaces
  • Odorless and highly effective acid-based formulation
  • Ensures coating or painting adhesion depending on surface roughness
  • Applicable via spray or immersion
  • Reaction time: 5–20 minutes depending on conditions
  • Yield: approx. 6–8 m²/kg (spray application)
  • Produces a bright, uniform metal surface
  • Pre-clean with alkaline degreaser (e.g. PELOX AR)
  • Rinse thoroughly with clean water using a pressure washer (min. 150 bar)
  • Optimal temperature range: 5–25 °C
  • Use appropriate protective gear
  • Avoid direct sunlight and high ambient temperatures during use

Usage Instructions

  • Test surface compatibility before application
  • Homogenize product before use
  • Spray or immerse using suitable equipment
  • Use PPE and follow safety protocols
  • Rinse thoroughly until pH-neutral
  • Handle wastewater and residues properly

Materials

Aluminum surfaces, copper and copper alloys, and other compatible non-ferrous metals

Application Areas

Pre-treatment of aluminum surfaces prior to coating, painting, or further surface processing

Comparison Table

Feature Specifications
Reaction Time 5–20 minutes
Yield Approx. 6–8 m²/kg (spray)
Color Red
Acid Content Phosphoric acid, hydrofluoric acid
Hazard Classification GHS05, GHS06 – Danger
Material Compatibility Aluminum, copper, and other non-ferrous metals

    You are inquiring about: