1. Home
  2. JosS Product Catalogue
  3. PELOX
  4. Cleaning & Care
  5. Surface Cleaners
  6. SURFACE CLEANER FR-D 50

SURFACE CLEANER FR-D 50

High-performance surface cleaner for chromium-nickel stainless steels, effectively removes organic contamination and corrosion without altering the surface.

Category:

SURFACE CLEANER FR-D 50

Surface Cleaner for Chromium-Nickel Stainless Steels
Developed for deep cleaning of metallic surfaces, especially after mechanical surface treatment.

  • Removes organic contamination, dirt films, light oil and grease residues

  • Effective against corrosion caused by seawater, chlorinated water, or chlorine-based cleaners

  • Ideal for post-treatment cleaning after grinding or brushing

  • Does not alter the surface even after prolonged exposure

  • Suitable for all common chromium-nickel stainless steels

  • Application by brushing, spraying, or immersion

  • Minimum reaction time: approx. 30 minutes (pre-test recommended)

  • Clear brightening of surface without structural change

  • Yield: approx. 6–8 m²/kg

  • Apply using brush, spray, or with mechanical aids

  • Requires thorough rinsing with clean water until pH-neutral

  • Avoid high ambient temperatures and direct sunlight

  • Use personal protective equipment (PPE)

  • Observe safety and proper wastewater disposal



Application

PELOX Surface Cleaner FR-D 50 is a high-performance cleaning agent for chromium-nickel stainless steel surfaces. It removes contamination and corrosion without altering the treated surface.

Properties

  • Removes organic contamination, dirt, light oil and grease films
  • Effective against corrosion from seawater, chlorinated water, or chlorine-based cleaners
  • Does not alter the surface, even after prolonged contact
  • Suitable for all common chromium-nickel stainless steels
  • Application via brush, spray, or immersion (on request)
  • Recommended reaction time: min. 30 minutes (varies by contamination type)
  • Produces clear surface brightening
  • Yield: approx. 6–8 m² per kg
  • Requires thorough rinsing with clean water until pH-neutral
  • Avoid high temperatures and direct sunlight (ideal temp: 5–25 °C)
  • Use appropriate PPE
  • Follow proper wastewater treatment and disposal

Usage Instructions

  • Test product suitability beforehand
  • Homogenize before use
  • Apply by brush, spray, or immersion
  • Do not exceed 25 °C material temperature during application
  • Rinse thoroughly with high-pressure water until surface is pH-neutral
  • Avoid use in direct sunlight or high ambient heat

Materials

All common chromium-nickel stainless steels

Application Areas

Cleaning after mechanical processing (grinding, brushing), corrosion removal, organic film cleaning

Comparison Table

Feature Specifications
Reaction Time min. 30 minutes
Yield Approx. 6–8 m²/kg
Color Green
Acid Content Phosphoric & Nitric Acid
Hazard Classification GHS05, Danger
Material Compatibility Chromium-nickel stainless steels

    You are inquiring about: