1. Home
  2. JosS Product Catalogue
  3. PELOX
  4. Pickling & Passivation
  5. Spray Pickling
  6. PICKLING SPRAY SP-VCF/2

PICKLING SPRAY SP-VCF/2

PELOX Pickling Spray SP-VCF/2 is a low-emission spray pickling solution specially developed for cold-rolled and ground stainless steel surfaces, ensuring effective cleaning with minimal surface brightening.

Category:

PICKLING SPRAY SP-VCF/2

Spray Pickling Paste for Cold-Rolled and Ground Stainless Steel Surfaces
Formulated for reduced gas emission and high aesthetic requirements.

  • Specially developed for cold-rolled and ground stainless steel

  • Suitable for chromium-nickel steels and titanium surfaces

  • Low acid concentration reduces gas emissions during application

  • Ideal for visible construction elements with uniform appearance

  • Efficiently removes heat tint, scale, and foreign contaminants in a single step

  • Reaction time: approx. 30 to 360 minutes

  • Produces a metallically clean surface with slight, even brightening (no clouding)

  • Available in transparent or red

  • Yield: approx. 4–6 m² per kg

  • Requires thorough pre-cleaning and spraying equipment

  • Excellent wet phase reactivity ensures cost-efficient application



Application

PELOX Pickling Spray SP-VCF/2 is specially designed for the treatment of cold-rolled and ground stainless steel surfaces, offering effective removal of heat tint, scale, and contamination in one step. It features reduced acid concentration to lower gas emissions and is ideal for visually exposed construction surfaces.

Properties

  • Low-emission formula with reduced acid content
  • Efficient in treating chromium-nickel steels and titanium
  • Maintains surface uniformity with minimal brightening
  • Removes discoloration, oxide scale, and impurities in one pass
  • Available in red or transparent version
  • Reaction time: approx. 30 to 360 minutes
  • Yield: approx. 4–6 m² per kg

Usage Instructions

  • Test product compatibility before use
  • Pre-clean with PELOX FR-D (acid) or AR 90 (alkaline) degreaser
  • Stir thoroughly before application
  • Apply using suitable spraying equipment (available from PELOX)
  • Rinse with high-pressure water (min. 150 bar) until pH-neutral
  • Avoid direct sunlight and high ambient temperatures (5–25 °C recommended)
  • Wear full PPE and follow safety instructions
  • Dispose of residues and rinse water according to local regulations

Materials

Cold-rolled and ground stainless steel, chromium-nickel steels, titanium

Application Areas

Architectural components, high-aesthetic visible stainless surfaces

Comparison Table

Feature Specification
Reaction Time 30–360 minutes
Yield Approx. 4–6 m² per kg
Color Options Transparent, red
Acid Content Nitric acid, hydrofluoric acid
Hazard Classification GHS05, GHS06 – Danger
Material Compatibility Cold-rolled and ground stainless steels, titanium, Cr-Ni steels

    You are inquiring about: