WD-40 Specialist Silicone spray for all surfaces 400ml Smart Straw

WD-40 Specialist® 400ml Silicone spray 

WD-40 Specialist® Silicone Lubricant safely lubricates, waterproofs and protects metal and non-metal surfaces such as rubber, plastic and vinyl. This formula dries fast and leaves a clear, non-staining film that doesn’t stick or make a mess, so it won’t attract dirt. This silicone lubricant spray is great for use on cables, pulleys, guide rails, valves, linkages, hinges, locks and more. Effective in-use temperatures ranging from -35°C to +200°C (-100° F to 500° F)

• Temperature ranges : -35°C to +200°C (-100°F to 500°F)

Characteristics

• Lubricates, waterproofs and protects 
• Quick drying with no messy residue 
• Safe to use on rubber, vinyl and plastic 
• Protects Against Rust
• NSF H2 Reg # 146863 
• 50-state VOC Compliant 

Field of application

• Cables
• Pulleys 
• Guide Rails 
• Valves 
• Linkages 
• Hinges

Advantages of WD-40 Smart Straw

With the Smart Straw applicator, you’ve got two ways to spray; use the flip up straw for hard to reach areas, such as inside chains, locks or rollers, then flip it down to use the wide angle spray eye for area coverage on surfaces. Whichever way you need to spray, you can rely on the clever 360° valve to work efficiently at every angle, even upside down.

echnical specifications

• Boiling point (initial): 221°C 
• Density: Not Determined
• Solubility in water: Insoluble
• pH: Not Applicable
• Vapor pressure: 0.07mmHg @ 25°C
• Vapor density: 5.3 (Petroleum Solvent)
• Percent volatile: >80%
• VOC: 20%
• Coefficient of water/oil distribution: Not Determined
• Appearance/odor: Clear liquid with a characteristic odor.
• Flashpoint: <-30°C (-22°F) (CC ASTM D3828)
• Flammable limits: LEL: 0.6% UEL: 5.0%

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H336: May cause drowsiness or dizziness.
• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.

Safety Statements (P-phrases)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing vapours/spray.
• P271: Use only outdoors or in a well-ventilated area.

Response:

• P312: Call a POISON CENTER/doctor if you feel unwell.

Storage:

• P405: Store locked up.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C.

Disposal:

• P501: Dispose of contents/container to an approved waste disposal plant.

Additional Labeling (EUH-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.

Other Hazards

• The mixture contains no vPvB substances (vPvB = very persistent, very bioaccumulative).
• The mixture contains no PBT substances (PBT = persistent, bioaccumulative, toxic).
• The mixture contains no substances with endocrine-disrupting properties.

WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, [email protected], www.wd40.de