WD-40 Classic Multi-use oil 100ml spray can with extension

WD-40® Classic 5-in-1 Multi-Use oil in handy 100ml spray can with extension tube

WD-40 Multi-Use product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture, and lubricates almost anything. The WD-40 Multi-Use Product 100ml handy can is the perfect travel-sized problem solver.

• Temperature application range: -50 to +150 °C

5-in-1 product:

• Rust Remover
• Lubricant
• Contact spray
• Cleaner
• Corrosion protection

Characteristics

• Compatible with plastics, rubbers and all metals
• Gets under dirt, marks, and grease, making it easy to wipe them away. It also dissolves adhesives, allowing the easy removal of labels, tape, and stickers
• Protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements
• Lubricating ingredients are widely dispersed, and hold firmly to all moving parts
• Loosens rust-to-metal bonds and frees stuck, frozen, or rusted metal parts
• Because WD-40 displaces moisture, it quickly dries out electrical systems to eliminate moisture-induced short circuits (Remember to turn the power off before you spray)
• Silicone and chlorinated solvent free
• Non-conductive

Field of application

• Garden tools and implements
• Battery connections
• Bicycle frame
• Door locks and hinges
• Power tools
• Engines
• Alloys
• Exhaust systems

Technical specifications

• Boiling point (initial): 183°C (360°F)
• Color: Light amber cloudy liquid
• Solubility in water: Insoluble
• Odor: Characteristic
• Freeze point/ pour point: <-63°C (-81°F ) (ASTM D-97)
• Vapor density: >1
• VOC: 24.5% by weight
• Kinematic viscosity @ 38˚ C (100˚ F ) 2.8 cSt
• Appearance: Aerosol – Aerosolized Liquid Bulk – Liquid
• Flashpoint: 59°C (138°F) (TCC)
• Flammable limits: LEL: 0.6% UEL: 8.0%
• Vapor pressure: Aerosol – 95-115 psi @ 21° C (70° F) Bulk – 1 psi @ 38° C (100° F) (ASTM D323)
• Specific gravity @ 25˚ C (77˚ F ) 0.81
• Operating temperature: -50°C to 150°C (-60° F to 300° F)
• Percent volatile: 70-75% by weight
• Dielectric strength: 38,000 volts per 0.10 inch Kb
• Value: 25 wet film thickness: 50 um (0.002 inch)
• Coverage: 600-1000 ft2 per gal
• You can find detailed information in our datasheet here

Hazard Statements (CLP)

Signal word: Danger.

Hazard Statements (H-codes)

• H336: May cause drowsiness or dizziness.
• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.

Precautionary Statements (P-codes)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing vapor or aerosol.
• P271: Use only outdoors or in well-ventilated areas.

Response:

• P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P331: Do NOT induce vomiting.

Storage:

• P405: Store locked up.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.

Disposal:

• P501: Dispose of contents/container in accordance with local regulations.

Additional Labeling (EUH-codes)

• EUH066: Repeated exposure may cause skin dryness or cracking.

Storage and Disposal

• Store in a cool, well-ventilated place.
• Dispose of in compliance with local regulations.

WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, [email protected], www.wd40.de