SurTec OKS 510 MoS2 bonded coating fast-drying 500g tin

Sur Tec OKS 510 is an air-drying MoS₂-based lubricant coating used for dry lubrication of machine elements during temporary operation and long standstill periods.

Field of application

• Run-in lubrication in combination with oil or grease lubrication
• Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation
• Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds
• Dry lubrication in dusty environment, to avoid adhesions
• Coating of punching tools

Properties

• Highly effective due to good adhesion to prepared substrates
• Allows a low coefficient of sliding friction also under heavy loading
• Increased wear protection
• Radiation and vacuum-resistant
• Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs
• Also available as spray version OKS 511

Technical Data

• Lower operating temperature: -180°C 
• Upper operating temperature: 450°C 
• Flashing point < 65 (< 5°C): -30°C 
• Surface covering: 10-50 m²/can 
• Density (at 20°C): 0.96 g/cm³
• Colour: grey-black
• Size: 500g
• Packaging type: tin
• Also available in: 5kg hobbock, 25kg hobbock and 400ml spray can (OKS 511)

Industries​

• Iron and steel industry
• Rubber and plastic processing
• Chemical industry
• Logistics
• Paper and packaging industry
• Rail vehicle technology
• Glass and foundry industry
• Plant and machine (tool) engineering
• Municipal services
• Shipbuilding and marine technology

 

---

Hazard Information (CLP)

    

Signal word: Danger.

Hazard Statements (H-phrases)

• H225: Highly flammable liquid and vapour.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long lasting effects.

Precautionary Statements (P-phrases)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing vapours.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/ eye protection/ face protection.

Response:

• P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor.
• P331: Do NOT induce vomiting.
• P370 + P378: In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.

Storage:

• P403 + P235: Store in a well-ventilated place. Keep cool.

Hazardous Components:

• Naphtha (petroleum), hydrotreated light; Low boiling point hydrogen treated naphtha
• Butan-1-ol

Information on product safety (Manufacturer, Contact)

OKS Spezialschmierstoffe GmbH, Ganghoferstr. 47, D-82216 Maisach-Gernlinden, +49 8142 3051 500, [email protected], www.oks-germany.com